DEMA CPM 310 G User Manual

- 169 -
Settings » Automatic Control Settings » CB Supervision
A. CB Supervision Settings window is accessed by clicking the CB Supervision button in the Automatic Control
Settings window.
B. Save to Buffer button sends the parameter changes to the DigiConnect buffer. When changes are to be
applied to CPM 310 G unit, Save to Device button must be utilized, which is located under the Buffer tab.
1. CB Supervision window allows the users to have the various types of circuit breaker supervision functions
into or out of service and set the needed parameters for them. Functions on this menu include:
 CB tripping time supervision,
 CB closing time supervision,
 Trip pulse duration control,
 Close pulse duration control,
 CB charging spring supervision,
 CB trip numerator supervision,
 Total trip amperes supervision,
 Total trip amperes-square supervision,
 CB trip circuit supervision.
2. Please see the section named CB Supervision Settings Menu in the Relay Menus Manual earlier in this book
for applications and details of the function. Settings on this menu are done the same way on CPM 310 G
menus. □

DEMA CPM 310 G Specifications

General

Brand	DEMA
Model	CPM 310 G
Category	Relays
Language	English