DEMA CPM 310 G User Manual

- 152 -
Settings » Protection Settings » Protection Settings Group 1/2 » Earth Protection Settings
A. Earth Protection Settings button leads to the menu where earth overcurrent protection parameters are
set.
B. Save to Buffer button sends the parameter changes to the DigiConnect buffer. When changes are to be
applied to CPM 310 G unit, Save to Device button must be utilized, which is located under the Buffer tab.
1. Earth overcurrent 1
st
threshold protection (I
e
>) (ANSI 50N/51N) parameters and settings area,
2. Earth overcurrent 2
nd
threshold protection (I
e
>>) (ANSI 51N) parameters and settings area,
3. Earth overcurrent 3
rd
threshold protection (I
e
>>>) (ANSI 51N) parameters and settings area.
NOTE
The determination processes of parameter set values are beyond the content of this guide. See the relevant
section of the Relay Menus Manual for assistance on the protection functions and their parameters. Consider
providing professional help on the evaluation of parameters. □

DEMA CPM 310 G Specifications

General

Brand	DEMA
Model	CPM 310 G
Category	Relays
Language	English