DEMA CPM 310 G User Manual

- 155 -
Settings » Protection Settings » Protection Settings Group 1/2 » Thermal Protection Settings
A. Thermal Protection Settings button leads to the menu where thermal overload protection parameters are
set.
B. Save to Buffer button sends the parameter changes to the DigiConnect buffer. When changes are to be
applied to CPM 310 G unit, Save to Device button must be utilized, which is located under the Buffer tab.
1. Thermal overload protection (I
Θ
>) (ANSI 49) parameters and settings area.
NOTE
The determination processes of parameter set values are beyond the content of this guide. See the relevant
section of the Relay Menus Manual for assistance on the protection functions and their parameters. Consider
providing professional help on the evaluation of parameters. □

DEMA CPM 310 G Specifications

General

Brand	DEMA
Model	CPM 310 G
Category	Relays
Language	English