Electrical Connection CAIRplus
54 PR-2009-0096-GB • Subject to modifications • R8-10/2015
Fig. 7-2
7.2.6 Installing and connecting actuator motor
• With a factory-mounted DencoHappel actuator, connect the latter in accordance
with the specifications in the data sheet on actuators.
• If other actuators are used - refer to the relevant documentation.
• Ensure proper operation of this component.
• Be sure not to start up the fans with closed dampers.
7.2.7 Additional electrical components
• Connect additional electrical components in accordance with the relevant provided
documentation and wiring diagrams.
Notice!
• Adjust the final position switch before commissioning!