105
ENGLISH
(3) CD
ÆÆ
MD recording (when the ADV-M51 and DMD-M31 are connected with a system cord)
• CDs can easily be recorded onto MiniDiscs. Check and adjust the recording input selection (analog or digital) and the recording level beforehand.
1
Turn on the ADV-M51’s power.
• The system’s
power turns on.
ADV-M51 Remote control unit
[1] Synchronized recording function
2
Press the FUNCTION button and switch the function to
“DVD”.
3
Open the ADV-M51’s disc holder, load
the CD, then close the disc holder.
ADV-M51
4
Check that the total number of tracks and total playing time
on the CD appear on the display.
Example: For a CD with a total of 16 tracks and a total playing
time of 53 minutes, 20 seconds
5
Load the MD onto which you want to record into the MD
recorder’s MD slot.
6
Press the recording button on the MD
recorder once to set the recording
standby mode.
DMD-M31
7
Press the play/pause button on the ADV-M51 or the DVD
play button on the remote control unit.
• Recording of the
CD starts
automatically.
ADV-M51 Remote control unit
ADV-M51 Remote control unit
The recording standby mode is set once playback of the CD ends.
Main unit (ADV-M51) MD recorder (DMD-M31)
[2] Synchronized CD recording (CD SRS)
Perform the same operations as for steps 1 to 5 above.
q
y
Press the CD SRS button on the MD
recorder to select the synchronized
recording mode.
• The mode switches as shown
below each time the button is
pressed.
SRS1disc Rec?
SRS Make Gp?
SRS1Tr Rec?
The entire CD is recorded.
The entire CD is recorded and
registered as a group.
Only the first track on the CD is
recorded.
Synchronized recording of a specific track is possible by
selecting the track number using the 8 and 9
buttons on the ADV-M51 then selecting ”SRS 1Tr
Rec?” on the MD recorder.
u
Press the MD recorder’s ENTER
button.
• Recording of the CD starts
automatically.
Once all the tracks on the CD have been played, both the ADV-
M51 and MD recorder are automatically set to the stop mode.
Even if the entire CD has not yet been played, both the ADV-M51
and MD recorder are automatically set to the stop mode once the
MD is full.
To stop synchronized recording, press the stop button (2) on the
ADV-M51 or the MD recorder.
NOTES:
• Synchronized recording does not work when the ADV-M51 is
set to a function other than DVD.
• Synchronized recording does not work when in the programmed
play mode. When in the random play or repeat play mode, the
respective mode is canceled when synchronized recording
starts.
1
18Tr02m 46s
-60 -40 -30 -20 -12 -6 -2 0
L
dB
R
PUSH
ENTER
MINIDISC RECORDER DMD-M31
8
9
POWER LOADING MECHANISM
MULTI REC
CD SRS
MEMORY REC
CHARACTER/
TIME/INPUT
EDIT
ON / STANDBY
5
,
t
5
,
t
y u
6
DVD SURROUND RECEIVER ADV-M51
SURROUND SELECT
PUSH-PARAM
FUNCTION
MENU SET
TONE SDB
BAND
VOLUME
PHONES
ON STANDBY
V IDE O
Radio
CONPACT
DIGITAL VIDEO
PRO LOGIC
VIRTUAL SPEAKER
USURRO
DIGI T
N
D
AL
W
M
A
MP
7
3
,e
3
,e
1
,q
2
,w
+
-
+
-
A / V
3
A-B REPEAT
SEARCH MODE
ONOFF
REPEAT RANDOM
CLEAR ZOOMSLIDE MODE
PROG/DIRECT
MEMO BANDMODE
STAT U S
FUNCTIONSURROUNDINPUT MODETEST TONE
DVD
TUNER
CH
3
-
+
21
654
987
0
/
10
CALL
MUTING
+
10
SYSTEM MD
CDR TAPE
TUNER TV / VCR
VCR
NTSC/PAL
SLEEP
ENTER EDIT
/
MENUCHARAC.
REC
TIMETITLE
TUNING /
TV VOL
TV CH TV CH
TUNERDVD
MD/ LINE-1
TAPE/ LINE-2
AUTO DECODE
VIRTUALDIRECT
5CH STEREO
STEREO
D.AUX
IN
/
SURR.
IN
/
SURR.
DVD
T VT V INSOURCE
9
8
21
76
+
-
CD SRS
RTCT
PTYRDS
7
1
,q
2
,w
To Next Page
Loading...
