Denon AVR-588 - User Manual

Other manuals for Denon AVR-588

Specifications2 pages

Code List1 page

Connection Guide4 pages

Questions and Answers

A
Andrea VegaAug 14, 2025
Why is there no sound from my Denon Stereo Receiver speakers?
- D
  Diane Lopez DDSAug 14, 2025
  If no sound is produced from the speakers of your Denon Stereo Receiver, consider the following: * Check the connections with the input devices and the speaker cables. * Ensure the device you want to play and the set input source match. Select an appropriate input source. * Adjust the master volume to an appropriate level if it's turned too low. * Cancel the mute mode if it is set. * Disconnect the headphones if they are connected. * Select an input source for which the digital input setting has been made if no digital signals are being input. * Set the input mode to match the connectors to which the digital inputs are assigned and the settable input modes.
A
Alexander BoydAug 17, 2025
Why is there no sound from my Denon Stereo Receiver subwoofer?
- R
  rosschristopherAug 17, 2025
  If there's no sound coming from the subwoofer connected to your Denon Stereo Receiver, consider the following: * Turn on the subwoofer's power. * Set the “Subwoofer” setting at “Speaker Setup” to “Yes.” * Check the connections to ensure the subwoofer is properly connected. * Adjust the subwoofer’s volume to an appropriate level, ensuring it is not turned off.
S
Steven ZavalaAug 20, 2025
Why is DTS sound not outputting on my Denon Stereo Receiver?
- C
  Christopher WhiteAug 20, 2025
  If DTS sound is not outputting on your Denon Stereo Receiver, consider the following: * Set the DVD player’s audio output setting to bitstream. For details, refer to the DVD player’s operating instructions. * Use a DTS-compatible player if the current DVD player is not compatible with DTS sound playback. * Set the unit’s “Input Mode” setting to “Auto” or “DTS” mode.
D
Dana JohnsonAug 25, 2025
What to do if my Denon Stereo Receiver power turns off suddenly?
- C
  Christopher WellsAug 25, 2025
  If your Denon Stereo Receiver suddenly turns off and the power indicator flashes red, it could be due to several reasons: * The protection circuit may have activated because of a rise in internal temperature. Turn off the power, wait for the unit to fully cool down, and then turn it back on. * Core wires of two speakers may be touching each other, or a core wire is sticking out and touching the set's rear panel, activating the protection circuit. Unplug the power cord, twist the core wires tightly or terminate the speaker cables, and then reconnect. * Speakers with an impedance other than specified are being used. Use speakers with the specified impedance. * The set may be damaged. Turn off the power and contact a DENON service center.
F
frank91Aug 27, 2025
What to do if the Denon Stereo Receiver remote control doesn't work?
- C
  Christine HudsonAug 27, 2025
  If your Denon Stereo Receiver isn't responding to the remote control, here's what you can check: * Replace the batteries with new ones if they are worn. * Ensure you are operating within the specified range. * Remove any obstacles between the main unit and the remote control. * Insert the batteries in the proper direction, following the polarity marks in the battery compartment. * Move the set to a place where the remote control sensor will not be exposed to strong light. * Set “Remote ID” for the main unit to “1” if the remote ID of the main unit and remote control unit do not match.
B
brownshawnAug 31, 2025
Why does my Denon Stereo Receiver have no picture with HDMI connections?
- A
  Andrew BartonAug 31, 2025
  If you're not getting a picture with HDMI connections on your Denon Stereo Receiver, try these steps: * Check the connections to the HDMI connectors. * Verify the HDMI input setting. * Ensure the HDMI format of the player and monitor match.
J
Jeffrey SmithSep 3, 2025
Why does my Denon Stereo Receiver display turn off?
- H
  Harold HartmanSep 3, 2025
  If the display on your Denon Stereo Receiver is off, the dimmer setting may be set to “OFF.” Set it to something other than “OFF.”
J
Jeffery YoungSep 6, 2025
Why is there no picture on my Denon Stereo Receiver?
- S
  Stephen TannerSep 6, 2025
  If no picture appears on your Denon Stereo Receiver, consider the following: * Check the connections between the unit and the monitor. * Ensure the monitor’s input setting is correct; set it properly. * If the player is connected using the component input connectors and the monitor is connected using the video (yellow) or S-Video output connectors, high definition (1080i/720p) and progressive (480p/576p) video signals are not down-converted. Set the player to interlace (480i/576i) signals.
M
Megan ThorntonSep 9, 2025
Why are no test tones produced when I press the TEST button on my Denon Stereo Receiver remote?
- E
  Eric FloresSep 9, 2025
  If no test tones are produced when the TEST button on your Denon Stereo Receiver remote is pressed, and the surround mode is not set to “STANDARD” (Dolby/DTS Surround), set to the “STANDARD” (Dolby/ DTS Surround) mode.

Summary

Safety Precautions

Safety Instructions

Provides essential safety guidelines for operating the product.

FCC Compliance and Usage Notes

FCC Information for US Customers

Details compliance with FCC Rules and conditions for operation.

Important Notice: Product Modification

Warns against unauthorized modifications that may void FCC authority.

Usage and Care Recommendations

Covers temperature, ventilation, moisture, dust, foreign objects, and chemical avoidance.

Getting Started and Basic Operations

Initial Setup and Accessories

Covers initial preparations and lists supplied product parts.

Playback and Source Operations

Details playing audio/video, radio, XM, and iPods.

Remote Control and Advanced Operations

Remote Control Unit Functions

Explains operating DENON and preset components, including punch-through.

Handling and Installation Cautions

Unit Handling Precautions

Covers power-on checks, condensation, mobile phone noise, and moving.

Installation and Heat Dissipation

Advises on installation for proper heat dispersal.

Remote Control Unit Operation

Remote Control Features and Battery Installation

Lists remote capabilities, battery insertion, and operating range.

Component Identification and Connections Overview

Front Panel and Display Features

Identifies front panel controls, indicators, and display elements.

General Connection Preparations

Covers cable types, speaker, and HDMI connections.

Rear Panel Connections

Rear Panel Overview and Terminals

Identifies all connectors and terminals on the rear panel.

Specific Connection Types

Details digital/analog audio, video, antenna, and HDMI connections.

Remote Control Unit Controls

Front and Rear Panel Buttons

Identifies and describes the buttons on the remote control.

Connecting Components

Connecting the Monitor

How to connect a monitor to the AVR-588.

Connecting the Playback Components

How to connect playback devices like DVD players.

Connecting Audio Players

CD Player Connection

Instructions for connecting a CD player.

iPod Connection

Instructions for connecting an iPod using a Control Dock.

Connecting Tuners and Recording Devices

TV;CABLE Tuner Connection

Instructions for connecting a TV/CABLE tuner.

Video Cassette Recorder Connection

Instructions for connecting a VCR.

Connecting Recording and Other Devices

CD Recorder; MD Recorder; Tape Deck Connection

Instructions for connecting these recording devices.

Video Camera; Game Console Connection

Instructions for connecting video cameras and game consoles.

Connecting Advanced Components

Multi-channel Output Component Connection

How to connect components with multi-channel outputs like DVD players.

XM Radio Connection

How to connect an XM Mini-Tuner and Home Dock for XM Radio.

Antenna Connections

FM Antenna Setup

How to connect FM antennas (indoor/outdoor).

AM Antenna Setup

Instructions for connecting AM antennas and loop assembly.

Power and Initial Setup

Connecting the Power Cord

Steps to connect the power cord and notes on AC outlets.

Turning the Power On

Instructions for powering on the unit after connections.

Operations Overview

Menu Map

Overview of the menu structure for system setup, parameter, and information.

Front Display Examples

Shows typical displays for menu items and settings.

System Setup Procedures

System Setup Operations

Explains how to navigate and perform settings in System Setup.

Button Name Explanations

Clarifies button notation used in the manual.

Speaker Setup and Configuration

Speaker Configuration and Size

Settings for speaker size and bass capability (Front, Center, Surround, Subwoofer).

Subwoofer Mode Setup

Setting for reproducing low-range signals via the subwoofer.

Front Speaker Size Setting

Setting the size for the front speakers.

Speaker Distance and Frequency Settings

Speaker Distance Measurement

Setting speaker distances from the listening position.

Crossover Frequency Setup

Setting the frequency for subwoofer bass handling.

Test Tone Level Adjustment

Adjusting channel levels using test tones.

Input Source Assignment

HDMI and Digital Input Assignment

Assigning HDMI and digital input connectors to sources.

iPod, Subwoofer, and Antenna Settings

Configuring iPod input, subwoofer level, and antenna aiming.

Option Setup Configurations

Amplifier Assignment and Volume Control

Defining amplifier use and setting volume limits and power-on levels.

Surround Mode and Remote ID Settings

Memorizing surround modes and setting remote control ID.

Surround Sound Modes

Standard and 2-Channel Playback

Standard mode and selecting modes for 2-channel sources.

Multi-channel and Simulation Playback

Decoding multi-channel formats and using DSP simulation.

Stereo, Direct, and DSP Playback

Stereo, direct playback, and DSP simulation options.

Surround Parameter Adjustments

Core Surround Parameters

Covers Mode, D.COMP, LFE, Center Image, Panorama, Dimension, Center Width.

Soundstage and Effect Adjustments

Adjusts Delay Time, Effect Level, and Room Size for acoustics.

Cinema EQ and Subwoofer Settings

Options for Cinema EQ, Subwoofer attenuation, and tone controls.

Surround Back Channel and Subwoofer Settings

Surround Back Channel Configuration

Controls for multi-channel and 2-channel surround back outputs.

Subwoofer and Tone Controls

Adjustments for subwoofer level, tone defeat, bass, and treble.

Audio Enhancement Features

RESTORER Function

Restores compressed audio signals for richer sound.

Night Mode Setting

Optimized setting for late-night listening.

Information Display

Status Information

Shows information about main zone settings based on input source.

Audio Input Signal Details

Shows details about input audio signals like format and signal type.

Dialogue Normalization Function

Automatically corrects standard signal level for Dolby Digital sources.

Playback Operations

Power Management

Steps to turn on and off the unit and standby mode.

Input Source and Mode Selection

How to select input sources and set input modes.

Playback Volume Adjustment

Adjusting master volume during playback.

Basic Operations and Listening Modes

Muting, Headphones, and Speaker Switching

How to mute, use headphones, and switch front speakers.

Display Brightness and Radio Tuning

Adjusting display brightness and tuning FM/AM broadcasts.

Radio Station Presets

Presetting Radio Stations

How to store favorite broadcast stations for easy tuning.

Listening to Preset Stations

How to select and listen to pre-stored radio stations.

XM Satellite Radio Operations

About XM Radio and Legal Information

About XM Radio service, legal info, subscriptions, and activation.

Basic XM Operation and Signal Check

Steps for basic XM operation, tuning, and checking signal strength.

iPod Operations

iPod Searching and Basic Playback

Steps for searching and selecting iPod input source for playback.

iPod Playback Modes and Viewing

Details on playing music, repeat/shuffle, and viewing iPod content.

Music Playback Modes and Controls

Browse Mode Music Playback

How to navigate and play music from the iPod in browse mode.

Playback Control Options

Setting repeat/shuffle, stopping, and cueing tracks.

Advanced Operations and Functions

Recording on External Devices

How to record on an external device (REC OUT mode).

Convenient Functions

Details on Channel Level adjustment.

Memory Functions

Quick Select and Personal Memory Plus

Storing settings for quick recall and automatic parameter recall.

Backup Memory and Microprocessor Reset

Backup memory and procedure for resetting settings to default.

Remote Control Unit Operations

Operating DENON and Preset Components

Operating DENON components and pre-set components using the remote.

Remote Control Presetting

Setting up the remote for component operation.

Button Functions by Component

Front and Rear Button Functionality

Table showing front and rear panel button functions for various components.

Surround Mode Signal Compatibility

Punch Through Functionality

Amp Assign and Multi-zone Operations

Multi-zone Settings with Amp Assign

Assigning amplifiers for different channels to speaker outputs for zones.

Speaker Connections for Multi-zone and 7.1-channel

Details speaker connections for multi-zone and 7.1-channel playback.

Multi-zone Operation Details

Zone Power, Source, and Volume

Operating zone power, selecting input sources, and adjusting volume.

Zone Muting and Sound Control

Muting the sound for a specific zone.

Surround Mode and Parameter Overview

Surround Mode Input Signal Compatibility

Advanced Audio Technologies

Neural Surround Technology

Explains the Neural Surround technology for immersive audio.

HDMI and Deep Color Features

Details the HDMI interface and Deep Color for enhanced visuals.

xvYCC Color Space

Explains xvYCC color space for wider color support.

Audio Format Explanations

Dolby Surround Formats

Describes Dolby Digital, Pro Logic II, and Pro Logic IIx formats.

DTS Surround Formats

Explains DTS Digital Surround, ES Discrete/Matrix, NEO:6, and 96/24.

Speaker Installation Guide

Surround Back Speaker Placement

Discusses adding surround back speakers for improved sound positioning.

Speaker Layout Examples

Illustrates various speaker layout examples for different scenarios.

Troubleshooting Guide

Initial Checks and General Symptoms

Initial troubleshooting steps and general symptoms with solutions.

Remote Control and Display Issues

Troubleshooting remote control and display problems.

Audio Troubleshooting

No Sound Issues (Center, Surround, Subwoofer)

Troubleshooting no sound from center, surround, or subwoofer speakers.

Signal Output and Connection Issues

Troubleshooting issues with test tones, DTS output, HDMI audio, and monitor sound.

iPod and XM Satellite Radio Troubleshooting

iPod Playback Issues

Troubleshooting issues with iPod playback.

XM Satellite Radio Error Messages

Troubleshooting XM mode errors like "CHECK ANTENNA" and "NO SIGNAL".

Product Specifications

Audio and Tuner Specifications

Details on power amplifier output, speaker impedance, and tuner sensitivity.

General and Remote Control Specifications

Power supply, dimensions, weight, and remote control specs.

Preset Code Lists

DVD Player Preset Codes

Table of preset codes for controlling various brands of DVD players.

Other Equipment Preset Codes

Preset codes for VCR, CD Recorder, MD Recorder, Tape Deck, etc.

DVD Preset Codes (Continued)

Other Preset Code Lists

Denon DVD Player Preset Codes

Denon AVR-588 Specifications

General

Brand	Denon
Model	AVR-588
Category	Receiver
Language	English

Related product manuals

Denon AVR-5805-UPGRADE