32
ENGLISH
9
Press the SETUP button to quit the
setup mode.
The setup mode can also be quit by
using use the
• and
ª cursor buttons
at the setup screen to select “EXIT
SETUP” then pressing the ENTER
button.
Remote control unit
About the speaker system settings
B 2CH VIRTUAL
Select this when only using with the two speakers for the front
channels.
B 2CH VIRTUAL & SW
Select this when using two speakers for the front channels and
a subwoofer with built-in amplifier.
• Settings
Front : Small
Subwoofer : Yes
Subwoofer frequency : 150 Hz
Set the front speakers and subwoofer at equal distances.
NOTE:
• The speaker system is set to “2.1CH VIRTUAL” upon shipment
from the factory. If using speakers for the two front channels,
change the setting to “2CH VIRTUAL”.
To Next Page
Loading...
