Denon ADV-M51

87
ENGLISH
Example 2: Listening to a CD with the once timer
DVD SURROUND RECEIVER ADV-M51
SURROUND SELECT
PUSH-PARAM
FUNCTION
MENU SET
TONE SDB
BAND
VOLUME
PHONES
ON STANDBY
V ID EO
Radio
CONPACT
DIGITAL VIDEO
PRO LOGIC
VIRTUAL SPEAKER
USURRO
DIGI T
N
D
AL
W
M
A
MP
1
3,4,5,7
4,6
22
1
Turn on the power.
ON / STANDBY
Main unit
4
Turn the SURROUND/SELECT knob to display “ONCE”, then
press the MENU/SET button.
SURROUND / SELECT
PUSH - PARAM.
Main unit
ONCE
The display switches as follows
each time the
SURROUND/SELECT knob is
turned:
2
Open the disc holder, load the CD,
then close the disc holder.
Main unit
3
Press the MENU/SET button to
display “TIMER”.
MENU/SET
Main unit
TIMER
5
Press the MENU/SET button.
• The once timer time setting mode is set.
•“1” (once) lights.
1 FUNC
MENU/SET
Main unit
6
Turn the SURROUND/SELECT knob and set the function to
“DVD”.
1DVD
SURROUND / SELECT
PUSH - PARAM.
Main unit
7
Press the MENU/SET button.
• Timer function, “DVD”, is stored in
the memory.
MENU/SET
Main unit
8
Now follow steps 9 to 18 under “Setting the everyday timer
and once timer” (pages 85 and 86).
•“1” and “on” light when setting the start time.
“1” and “off” light when setting the stop time.
• Turn the once timer on at step 17.
2 Timer playback and recording can be performed when system connections are made between the ADV-M51 and the D-M31 series MD recorder
(DMD-M31) or cassette deck (DRR-M31). (Both the everyday and once timer can be used.)
• Timer playback of the cassette deck (when TAPE is set for LINE-2)
• Timer playback of the MD recorder (when MD is set for LINE-1 or LINE-2)
• Timer playback of the device connected to the AUX input terminals (when AUX is set for LINE-1 or LINE-2)
• Timer recording of radio programs from the ADV-M51 onto the cassette deck (when TAPE is set for LINE-1)
• Timer recording of radio programs from the ADV-M51 onto the MD recorder (when MD is set for LINE-1)
• Timer recording from the device connected to the AUX input terminals onto the cassette deck (when AUX is set for LINE-1 and TAPE is set
for LINE-2)
• Timer recording from the device connected to the AUX input terminals onto the MD recorder (when AUX and MD are set for LINE-1 and
LINE-2)
Timer recording onto the device connected to the AUX input terminals is not possible. The timer function changes automatically according
to the function set for LINE-1 and LINE-2.
NOTE:
• For timer recording and playback using the device connected to the AUX input terminals, note that the ADV-M51 cannot control the power
of the device or playback operations on it. Make the settings accordingly.
ONCE EVERYDAY
MENU/SET
Main unit