Denon AVC-A10H - Speaker Configuration and Amp Assign Settings; Connection Page

Speaker configuration and “Amp Assign” settings
This unit has a built-in 13-channel power amplifier. In addition to the basic 5.1-channel system, a variety of speaker systems can be configured by
changing the “Speaker Layout” settings to suit the application, such as 7.1-channel systems, bi-amp connections and 2-channel systems for multi-zone
playback. (v p. 216)
Perform “Speaker Layout” settings to suit the number of rooms and speaker configuration to be installed. (v p. 216)
Playback speaker in each zone
“Amp Assign” settings
Connection
page
MAIN ZONE ZONE2 ZONE3
5.1-channel playback
2-channel (Pre-out) 2-channel (Pre-out)
Can be set in all “Amp
Assign” settings.
49
7.1-channel playback 50
9.1-channel playback 11.1ch + ZONE2 52
11.1-channel playback 11.1ch + ZONE2 57
13.1-channel playback 13.1ch (Default) 62
11.1-channel playback (bi-amp connection of front
speakers)
11.1ch (Bi-Amp) 66
5.1-channel playback (bi-amp connection of front,
center and surround speakers)
5.1ch Full Bi-Amp 67
Second front speakers 11.1ch + Front B 68
11.1-channel playback
2-channel
(Speaker out)
2-channel (Pre-out) 11.1ch + ZONE2 69
11.1-channel playback 2-channel (Pre-out)
2-channel
(Speaker out)
11.1ch + ZONE3 69
Contents Connections Playback Settings Tips Appendix
47
Front panel Display Rear panel Remote Index