Pairing with other Bluetooth devices
Pair a Bluetooth device with this unit.
1
Activate the Bluetooth settings on your mobile device.
2
Press and hold Bluetooth on the remote control unit for
at least 3 seconds.
This unit will go into the pairing mode.
3
Select this unit when its name appears in the list of
devices displayed on the screen of the Bluetooth
device.
0
This unit can be paired with a maximum of 8 Bluetooth devices. When a 9th
Bluetooth device is paired, it will be registered in place of the oldest registered
device.
0
You can also enter pairing mode by pressing the OPTION button when the
Bluetooth playback screen is displayed and selecting “Pairing Mode” from the
displayed option menu.
NOTE
0
To operate the Bluetooth device with the remote control of this unit, the Bluetooth
device needs to support the AVRCP profile.
0
The remote control of this unit is not guaranteed to work with all Bluetooth devices.
0
Depending on the type of Bluetooth device, this unit outputs audio that is coupled
to the volume setting on the Bluetooth device.
o
Operations accessible through the option
menu
0
“Pairing with other Bluetooth devices” (v p. 93)
0
“Adjusting the audibility of dialog and vocals (Dialog
Enhancer)” (v p. 119)
0
“Adjusting the volume of each channel to match the input source
(Channel Level Adjust)” (v p. 120)
0
“Adjusting the tone (Tone)” (v p. 121)
0
“Adjusting audio delay (Audio Delay)” (v p. 122)
0
“Changing the strength of Tactile Transducer according to the input
source (Tactile Transducer)” (v p. 123)
0
“Displaying your desired video during audio playback (Video
Select)” (v p. 124)
0
“Playing the same music in all zones (All Zone Stereo)” (v p. 125)
0
“Changing the speaker settings to match the listening environment
(Speaker Preset)” (v p. 126)
Contents
Connections Playback Settings Tips Appendix
93
Front panel Display Rear panel Remote Index
To Next Page
Loading...
Need help?
General
