Denon AVC-A1XV User Manual (English)

Other manuals for Denon AVC-A1XV

Operating Instructions178 pages

Operating Manual18 pages

Questions and Answers:

S
Sarah WalkerAug 16, 2025
Why is there no sound coming from my Denon Amplifier, even though the display is lit?
- K
  Katherine RobertsonAug 16, 2025
  If the display is lit but no sound is produced, several factors could be at play. First, ensure that the speaker cords are securely connected. Check that the FUNCTION knob is in the correct position. Also, verify that the volume control isn't set to the minimum and that MUTING is switched off. Lastly, confirm that a digital signal is being input and that you've selected the appropriate digital signal input source.
T
Thomas RileyAug 19, 2025
What to do if my Denon Amplifier remote control is not working?
- L
  Lisa PowellAug 19, 2025
  If the Denon Amplifier isn't responding to the remote control, try these steps: * Replace the batteries with new ones. * Move closer to the unit. * Ensure there are no obstacles between the remote and the unit. * Make sure you're pressing the correct button. * Verify the batteries are inserted correctly, with the < and > ends in the proper orientation.
B
Becky ChavezAug 22, 2025
Why isn't there a picture on my monitor when connected to my Denon AVC-A1XV?
- A
  Amanda MitchellAug 22, 2025
  If nothing is displayed on the monitor, check the following: Ensure the AVC-A1XV’s video output jacks and the monitor’s input jacks are correctly connected. Verify that the monitor TV’s input setting is correctly set to the jacks where the video signals are connected. Make sure the VIDEO OFF mode is not active, and if it is, set the VIDEO ON mode. Also, ensure that the PURE DIRECT mode is not set; use a different surround mode. Finally, confirm that the resolution of the monitor device connected to the component monitor output connector matches the AVC-A1XV’s resolution, using the SCALE button on the main unit or remote to check the resolution setting.
M
Melissa CamposAug 25, 2025
How to fix no sound from subwoofer on Denon AVC-A1XV Amplifier?
- L
  Laura CantuAug 26, 2025
  If no sound comes from the subwoofer, first, ensure the subwoofer's power is turned on. Next, check that the subwoofer's initial setting is set to “YES.” Finally, verify that the subwoofer's output is properly connected.
T
Terry MyersAug 27, 2025
How do I get DTS sound on my Denon AVC-A1XV Amplifier?
- B
  Bonnie SchmidtAug 28, 2025
  To get DTS sound, first ensure that the DVD player’s audio output setting is set to bit stream by checking the DVD player’s initial settings. Confirm that the DVD player is DTS-compatible. Finally, check that the AVC-A1XV’s input setting is set to AUTO or DTS, not analog.
L
Luke BookerAug 30, 2025
What to do if there is no image with HDMI/DVI-D connection on Denon Amplifier?
- M
  Maria PearsonAug 30, 2025
  If there is no image being projected with an HDMI/DVI-D connection, check that the AVC-A1XV’s HDMI/DVI-D output jacks and the monitor’s input jacks are properly connected. Ensure that an HDMI/DVI-D signal is being input and that you've selected the correct HDMI or DVI-D signal input source. Note that the AVC-A1XV will not output a video signal unless the connected equipment supports HDCP. Verify that the settings of “MONITOR SELECT” are correct and that the output format of the connected player (HDMI/DVI-D FORMAT) matches the supported input format of the connected monitor equipment.
M
Mrs. Carolyn MillerSep 2, 2025
How to resolve no HDMI audio output on my Denon AVC-A1XV Amplifier?
- J
  James JohnsonSep 2, 2025
  To resolve the issue of no HDMI audio output, first, if the AVC-A1XV does not play HDMI audio signals, set the HDMI audio playback setting at the “HDMI/DVI In Assign” settings to “AMP.” Alternatively, if the HDMI audio signals are not output from the connected monitor device, set the HDMI audio playback setting at the “HDMI/DVI In Assign” settings to “TV.”
B
bbrownSep 4, 2025
How to fix a Denon Amplifier when the display is not lit and there is no sound?
- V
  Vanessa DavisSep 4, 2025
  If the display is not lit and no sound is produced when the power switch is on, check the insertion of the power cord plug to ensure it is securely plugged in.
M
Melissa GillespieSep 7, 2025
Why can't I set Ultra2 Cinema / THX Music Mode / THX Games Mode on my Denon Amplifier?
- F
  Frank BlankenshipSep 7, 2025
  If you cannot set Ultra2 Cinema / THX Music Mode / THX Games Mode, it may be because the surround back speaker is set to 1. Connect two surround back speakers.
H
heather82Sep 10, 2025
Why are there no test tones produced by my Denon AVC-A1XV Amplifier?
- T
  Tiffany HernandezSep 10, 2025
  If no test tones are being produced, ensure that the surround mode is set to Dolby Surround.

Denon AVC-A1XV Specifications

General

Amplifier Type	AV Receiver
Channels	7.1
Frequency Response	10 Hz - 100 kHz (+1, -3 dB)
Total Harmonic Distortion (THD)	0.05%
Input Impedance	47 k ohms
Input Sensitivity	200 mV
Signal-to-Noise Ratio	110 dB
HDMI Outputs	1
Component Video Inputs	3
Component Video Outputs	1
Analog Audio Outputs	1
Phono Input	Yes
THX Certification	THX Ultra2
Digital Audio Outputs	1 (coaxial)
Surround Sound Formats	Dolby Digital EX, Dolby Pro Logic IIx, DTS 96/24
Digital Audio Inputs	4 (optical) + 2 (coaxial)
Dimensions (W x H x D)	434 x 178 x 495 mm (17.1 x 7.0 x 19.5 inches)