_t]l![.t]][
1 3 4
2
1
Set the input function to "TUNER".
TUNER
Watching the display, press the BAND button to select the
desired band (AM or FM).
BAND
Press the MODE button to set the auto tuning mode.
_1 F I_1 ',J-'7 t_ I_:=FtlLI -,
..... ii .J r..il II I.i:.
Lit
4
Press the TUNING UP or DOWN button.
DOWN Up
O
• Automatic searching begins, then stops when a station
tuned in
NOTE:
• When in the auto tuning mode on the FM band, the "STEREO"
indicator lights on the display when a stereo broadcast is tuned in.
At open frequencies, the noise is muted and the "TUNED" and
"STEREO" indicators turn off
Set the input function to "TUNER".
Watching the display, press the BAND button to select the
desired band (AM or FM).
Press the MODE button to set the manual tuning mode
Check that the display's "AUTO" indicator turns off.
Press the TUNING UP or DOWN button to tune in the desired
station
The frequency changes continuously when the button is held
in.
NOTE:
• When the manual tuning mode is set, FM stereo broadcasts are received in monaural and the "STEREO" indicator turns off.
4O
To Next Page
Loading...
