Denon AVR-2311 User Manual

26
ENGLISH
RDS (Radio Data System)
RDS (works only on the FM band) is a broadcasting service which
allows a station to send additional information along with the regular
radio program signal.
NOTE
The operations described as follows using
SEARCH will not function in areas in which
there are no RDS broadcasts.
n RDS search
Use this function to automatically tune to FM stations that provide
the RDS service.
1
Press TUNER to switch the input
source to “TUNER”.
2
Press SEARCH to select “RDS
SEARCH”.
TUNER
7 Mode
Now Playing
CH A
68/9 BandTuning
Preset Memory
CH+/- MEMORY Search SEARCH
STEREO AUTO
FM
***
.
**
MHz
PS Name
Jamp to album
Program Category
RDS
PTY
TP
RT
: RDS Station
: Program Category
: Traffic Information
: Radio Text ON
SEARCH Mode
A5 FM 90.10MHz
Tuning CH+/-
3
Press CH + or CH –.
The search for RDS stations begins automatically.
• If no RDS stations are found with the above operation, all the
reception bands are searched.
• When a broadcast station is found, that station’s name appears on
the display.
• If no RDS station is found when all the frequencies have been
searched, “NO RDS” is displayed.
PTY (Program Type)
PTY identifies the type of RDS program.
The program types and their displays are as follows:
NEWS
News
WEATHER
Weather
AFFAIRS
Current Affairs
FINANCE
Finance
INFO
Information
CHILDREN
Children’s
program
SPORT
Sports
EDUCATE
Education
SOCIAL
Social Affairs
DRAMA
Drama
RELIGION
Religion
CULTURE
Culture
PHONE IN
Phone In
SCIENCE
Science
TRAVEL
Travel
VARIED
Varied
LEISURE
Leisure
POP M
Pop Music
JAZZ
Jazz Music
ROCK M
Rock Music
COUNTRY
Country Music
EASY M
Easy Listening
Music
NATION M
National Music
OLDIES
Oldies Music
LIGHT M
Light Classical
FOLK M
Folk Music
CLASSICS
Serious Classical
DOCUMENT
Documentary
OTHER M
Other Music
Tuning in radio stations
n Listening to preset stations
1
Press SHIFT to select the memory
block (A to G).
2
Press CH +, CH – or 1 – 8 to select
the desired preset channel.
You can also operate via the main unit.
In this case, perform the following
operations.
Press TUNING PRESET, then turn SOURCE
SELECT
to select the preset radio station.
n Direct frequency tuning
You can enter the receiving frequency directly to tune in.
1
Press SEARCH.
2
Input frequencies using the 0 – 9.
• If o is pressed, the immediately preceding
input is cancelled.
3
When setting is completed, press
ENTER.
The preset frequency is tuned in.

Denon AVR-2311 Specifications

General

Frequency range	10 - 100000 Hz
Audio output channels	7.1 channels
Audio A/D Converter (ADC)	24-bit/192kHz
Signal-to-Noise Ratio (SNR)	100 dB
Power output per channel (20-20KHz@8 Ohm)	135 W
HDMI in	6
Audio (L/R) in	8
Composite video in	1
Component video (YPbPr/YCbCr) in	2
Headphone connectivity	6.3 mm
12V trigger	Yes
Connectivity technology	Wired
Speakers connectivity type	-
Ethernet LAN	No
AM band range	522 - 1611 kHz
FM band range	87.5 - 108 MHz
Supported radio bands	AM, FM
Preset stations quantity	56
Supported video modes	1080p
Display	LCD
Product color	Black
Audio decoders	Dolby Digital EX, Dolby Digital Plus, Dolby Pro Logic II, Dolby Pro Logic IIx, Dolby Pro Logic IIz, Dolby TrueHD, DTS, DTS 96/24, DTS Neo:6, DTS-ES, DTS-HD
Apple docking compatibility	iPhone, iPod
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	1.9 W
Power consumption (typical)	600 W

Weight and Dimensions

Depth	381 mm
Width	434 mm
Height	171 mm
Weight	11200 g