Denon AVR 2808CI - AV Receiver User Manual

- 14 -
Z2 COMMAND : "*" parameter uses two ASCII characters. (see page4 J) section)
Z2 COMMAND ：Invalid at AVC-2808 for JAPAN
COMMAND PARAMETER
function example
Z2PS
BAS UP
ZONE2 BASS UP/DOWN , direct change to **dB
Z2PSBAS UP<CR>
BAS DOWN
**:00 to 99 by ASCII , 00=0dB
Z2PSBAS DOWN<CR>
BAS **
---AVR-2808 can be operated from -10 to +10(40 to 60)
---Invalid at AVR988
Z2PSBAS 00<CR>
BAS ?
Return Z2PSBAS Status
Z2PSBAS ?<CR>
TRE UP
ZONE2 TREBLE UP/DOWN , direct change to **dB
Z2PSTRE UP<CR>
TRE DOWN
**:00 to 99 by ASCII , 00=0dB
Z2PSTRE DOWN<CR>
TRE **
---AVR-2808 can be operated from -10 to +10(40 to 60)
---Invalid at AVR988
Z2PSTRE 00<CR>
TRE ?
Return Z2PSTRE Status
Z2PSTRE ?<CR>

Denon AVR 2808CI - AV Receiver Specifications

General

Brand	Denon
Model	AVR 2808CI - AV Receiver
Category	Stereo Receiver
Language	English