Denon AVR-2801

Other manuals for Denon AVR-2801

Questions and Answers:

T
Tracy CrawfordAug 14, 2025
What to do if my Denon Stereo Receiver display is lit but there's no sound?
- J
  John LynchAug 14, 2025
  If your Denon Stereo Receiver's display is lit but no sound is produced, consider these potential causes: * **Speaker cords:** Ensure they are securely connected. * **Audio function button:** Make sure it is in the correct position. * **Volume:** Increase the volume level. * **Muting:** Check if muting is enabled and switch it off. * **Digital signals:** If using digital input, ensure digital signals are being input or that you've selected the correct input jacks.
A
alvarezstephanieAug 17, 2025
How to fix a Denon Stereo Receiver when the display is not lit and there is no sound?
- L
  lyonssaraAug 17, 2025
  If the display is not lit and no sound is produced when the power switch is on, check if the power cord is securely plugged in. Also, try turning on the power with the remote control after turning the POWER switch on.
J
John DiazAug 20, 2025
What to do if sound is only coming from one channel on my Denon Stereo Receiver?
- A
  Adam AllisonAug 20, 2025
  If sound is only coming from one channel on your Denon Stereo Receiver, check the speaker cords and input/output cords to ensure they are securely connected.
M
Michael OwensAug 23, 2025
Why is the power indicator flashing rapidly and the display not lit on my Denon Stereo Receiver?
- R
  Richard MitchellAug 23, 2025
  If the display on your Denon Stereo Receiver is not lit and the power indicator is flashing rapidly, it could be due to: * **Short-circuited speaker terminals:** Switch the power off, properly connect the speakers, and then switch the power back on. * **Blocked ventilation holes:** Turn off the power, ensure the ventilation holes are unblocked to cool down the unit, and then turn the power back on. * **Continuous high power operation with inadequate ventilation:** Turn off the power, ventilate the unit well to cool it down, and then turn the power back on.
G
George GilbertAug 27, 2025
Why is my Denon Stereo Receiver not responding to the remote control?
- Z
  zandrewsAug 27, 2025
  If your Denon Stereo Receiver isn't responding to the remote control, try the following: * **Batteries:** Replace dead batteries with new ones. * **Distance:** Move closer to the unit. * **Obstacles:** Remove any obstacles between the remote and the unit. * **Button:** Ensure you are pressing the correct button. * **Battery insertion:** Verify the batteries are inserted correctly, with the < and > ends properly aligned.
D
dodsontristanAug 30, 2025
Why is my Denon Stereo Receiver producing a humming noise when playing records?
- J
  Joseph TranAug 31, 2025
  If your Denon Stereo Receiver is producing a humming noise when playing records, it could be due to: * The turntable's ground wire not being connected properly: Ensure it is securely connected. * An incomplete PHONO jack connection: Connect securely. * Proximity to a TV or radio transmission antenna: Contact your store of purchase.
P
Pamela ChenSep 3, 2025
Why are the instrument positions reversed during stereo playback on my Denon Stereo Receiver?
- P
  pamelamercerSep 3, 2025
  If the positions of instruments are reversed during stereo playback, check the left and right connections of the speakers or the input/output cords on your Denon Stereo Receiver.
N
nponceSep 6, 2025
How to stop a howling noise from my Denon Stereo Receiver when the volume is high?
- J
  Jonathan CruzSep 6, 2025
  If you are experiencing a howling noise when the volume is high on your Denon Stereo Receiver, consider that: * The turntable and speaker systems may be too close together: Separate them as much as possible. * The floor may be unstable and vibrates easily: Use cushions to absorb speaker vibrations transmitted by the floor. If the turntable lacks insulators, use audio insulators.
H
Heather KramerSep 9, 2025
How do I fix the on screen display not showing on my Denon Stereo Receiver?
- K
  Kyle GarzaSep 9, 2025
  If the on-screen display is not showing, check the system setup menu screen and ensure that “on screen display” is set to on.

Denon AVR-2801 Specifications

General

Channels	5.1
Frequency Response	10 Hz - 100 kHz
Frequency Response (+1, -3 dB)	20 Hz - 20 kHz
Input Impedance	47 kOhms
Total Harmonic Distortion	0.08%
Input Sensitivity (MM)	2.5 mV
Input Sensitivity (line)	200 mV
Speaker load impedance	6 - 16 ohms
Speaker Impedance	6 - 16 ohms
Video Connections	composite, S-Video
Tuning range	FM, MW
Tuner Section	FM, AM