EasyManuals Logo

Denon AVR-4208 User Manual

Denon AVR-4208
283 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #28 background imageLoading...
Page #28 background image
28
ENGLISH
Playing modes for different sources
The AVC-A11SR is equipped with many surround modes. We recommend using the surround modes as
described below in order to achieve the maximum effect for the specific signal source.
Though we recommend selecting the surround mode as described above, other surround modes can also
be selected.
2 ch sources recorded in Dolby Surround
Sources recorded in stereo
Sources recorded in monaural
Sources recorded in
Dolby Digital Surround EX
Maximum performance for playing movies on the AVC-A11SR.
We recommend these for sources consisting mostly of music.
Dolby Digital
or
DTS Surround
THX SURROUND EX
6.1 SURROUND
DTS-ES DSCRT 6.1, MTRX 6.1
Effective for 2-channel sources recorded in Dolby Surround or
for 7.1-channel playback with 5.1-channel sources.
WIDE SCREEN
This mode is optimized for playing 5.1-channel movies.
For sources recorded in Dolby Surround as well, this mode
provides the same power as with 5.1-channel sources.
HOME THX CINEMA
This mode is optimized for playing 5.1-channel music.
For Dolby surround recording sources, Dolby Pro-Logic II
playback is conducted.
DOLBY DIGITAL / DTS SURROUND / DTS 96/24
By suspending all the video circuits, analog input music
playback can be played with optimum quality. (The video
outputs do not operate.)
PURE DIRECT
Effective for achieving pure playback
If there is no need for tone control or distribution of the low
frequencies in function of the speaker configuration, select the
DIRECT mode to achieve the best sound quality.
DIRECT / STEREO
Select these for 7.1-channel playback with sources recorded
in stereo or monaural.
The effects are different for each of the surround modes.
Select the one most suited for the source being used.
DENON Original Surround Modes (see page 32)
5.1 ch sources
Sources recorded in DTS-ES
This is the optimum mode for playing sources recorded in DTS-ES.
When playing movies, setting this mode sometimes results in
a more natural sound. Select the mode as desired.
THX DSCRT 6.1, MTRX 6.1
is a 6.1-channel/7.1-channel surround mode.
This is a surround mode for playing 6.1- or 7.1-channel stereo
sources developed by Digital Theater Systems.
One of two playing modes, MUSIC (for music sources) or
CINEMA (for movie sources), can be selected according to
your preferences.
DTS NEO:6
[1] Playing sources recorded in Dolby Surround in the Home THX Cinema surround mode
THX Surround EX / Home THX Cinema mode
When the HOME THX CINEMA button is pressed, the surround mode is set as follows according to the signal
that is played:
q THX Surround EX
w Home THX CINEMA
e THX 5.1
r THX DSCRT 6.1, THX MTRX 6.1
When the HOME THX CINEMA mode is set when a DVD is played, check the DVD players digital output setting
and change the setting to one for which Dolby Digital and DTS bit stream signals can be output (bit stream,
for example).
1
q Select the program source.
INPUT SELECTOR
(Main unit) (Remote control unit)
4
1-q
2
1-w
2 1-w
1-q
4
2
Select the Home THX Cinema mode.
HOME
THX CINEMA
(Main unit) (Remote control unit)
3
Play a program source with the
mark.
For operating instructions, refer to the
manuals of the respective components.
w Set the input mode to AUTO.
INPUT MODE
(Main unit) (Remote control unit)
4
Adjust volume.
MASTER VOLUME
VOLUME
+
-
(Main unit) (Remote control unit)

Table of Contents

Other manuals for Denon AVR-4208

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-4208 and is the answer not in the manual?

Denon AVR-4208 Specifications

General IconGeneral
BrandDenon
ModelAVR-4208
CategoryAmplifier
LanguageEnglish

Related product manuals