Denon AVR 4308CI - AV Network Receiver - Page 13

- 13 -
COMMAND PARAMETER
function
example
PS PAN ON
PANORAMA ON/OFF
PSPAN ON<CR>
PAN OFF PSPAN OFF<CR>
PAN ?
Return PSPAN Status
PSPAN ?<CR>
DIM UP
DIMENSION UP/DOWN , direct change to **dB
PSDIM UP<CR>
DIM DOWN
**:00 to 99 by ASCII , 00=0,
PSDIM DOWN<CR>
DIM **
---AVR-4308 can be operated from 0 to 6
PSDIM **<CR>
DIM ?
Return PSDIM Status
PSDIM ?<CR>
CEN UP
CENTER WIDTH UP/DOWN , direct change to **dB
PSCEN UP<CR>
CEN DOWN
**:00 to 99 by ASCII , 00=0
PSCEN DOWN<CR>
CEN **
---AVR-4308 can be operated from 0 to 7
PSCEN 07<CR>
CEN ?
Return PSCEN Status
PSCEN ?<CR>
CEI UP
CENTER IMAGE UP/DOWN , direct change to **dB
PSCEI UP<CR>
CEI DOWN
**:00 to 99 by ASCII , 00=0.0
PSCEI DOWN<CR>
CEI **
---AVR-4308 can be operated from 0.0 to 1.0
PSCEI 10<CR>
CEI?
Return PSCEI Status
OSCEI ?<CR>
ATT ON
SW ATT ON/OFF
PSATT ON<CR>
ATT OFF PSATT OFF<CR>
ATT ?
Return PSATT Status
PSATT ?<CR>
SWR ON
SW ON/OFF
PSSWR ON<CR>
SWR OFF PSSWR OFF<CR>
SWR ?
Return PSSWR Status
PSSWR ?<CR>
RSZ S
ROOM SIZE direct change
PSRSZ S<CR>
RSZ MS PSRSZ MS<CR>
RSZ M PSRSZ M<CR>
RSZ ML PSRSZ ML<CR>
RSZ L PSRSZ L<CR>
RSZ ?
Return PSRSZ Status
PSRSZ ?<CR>
DELAY UP AUDIO DELAY UP/DOWN , direct change to ***dB PSDELAY UP<CR>
DELAY DOWN ***:000 to 999 by ASCII , 000=0ms, 200=200ms PSDELAY DOWN<CR>
DELAY *** ---AVR-4308 can be operated from 0 to 200 PSDELAY 200<CR>
PS COMMAND : "*" parameter uses two or three ASCII characters. (see page4 J) section)