Denon AVR 4308CI - AV Network Receiver - Page 14

- 14 -
COMMAND PARAMETER
function
example
PS NIGHT OFF NIGHT MODE direct change PSNIGHT OFF<CR>
NIGHT LOW PSNIGHT LOW<CR>
NIGHT MID PSNIGHT MID<CR>
NIGHT HI PSNIGHT HI<CR>
NIGHT ? Return PSNIGHT Status PSNIGHT ?<CR>
RSTR OFF AUDIO RESTORER direct change PSRSTR OFF<CR>
RSTR MODE1 PSRSTR MODE1<CR>
RSTR MODE2 PSRSTR MODE2<CR>
RSTR MODE3 PSRSTR MODE3<CR>
RSTR ? Return PSRSTR Status PSRSTR ?<CR>
PV CN UP
CONTRAST UP/DOWN , direct change to **dB
PVCN UP<CR>
CN DOWN
**:44 to 56 by ASCII , 50=0
PVCN DOWN<CR>
CN **
---AVR-4308 can be operated from -6 to +6(44 to 56)
PVCN 06<CR>
CN ?
Return PSCN Status
PVCN ?<CR>
BR UP
BRIGHTNESS UP/DOWN , direct change to **dB
PVBR UP<CR>
BR DOWN
**:00 to 12 by ASCII , 00=0
PVBR DOWN<CR>
BR **
---AVR-4308 can be operated from 0 to 12
PVBR 12<CR>
BR ?
Return PSBR Status
PVBR ?<CR>
CM UP
CROMA LEVET UP/DOWN , direct change to **dB
PVCM UP<CR>
CM DOWN
**:44 to 56 by ASCII , 50=0
PVSCM DOWN<CR>
CM **
---AVR-4308 can be operated from -6 to +6(44 to 56)
PVCM 06<CR>
CM ?
Return PSCN Status
PVCM ?<CR>
HUE UP
HUE UP/DOWN , direct change to **dB
PVHUE UP<CR>
HUE DOWN
**:44 to 56 by ASCII , 50=0
PVHUE DOWN<CR>
HUE **
---AVR-4308 can be operated from -6 to +6(44 to 56)
PVHUE 06<CR>
HUE ?
Return PSCN Status
PVHUE ?<CR>
PV COMMAND : "*" parameter uses two ASCII characters. (see page4 J) section)