Denon AVR 4308CI - AV Network Receiver - Page 38

- 38 -
※ANALOG TUNER Control
EVENT PARAMETER
function example
TF
AN******
(6 digits)
TUNER Frequency change
TFAN105000<CR>
--- ****.** kHz at AM band
(1050.00kHz at AM)
****.** MHz at FM band
TP
AN**(PRESET No.)
TUNER PRESET change to No.**
TPANA1<CR>
(PRESET No.”A1”)
TM TUNER BAND , MODE change
ANAM
---Band set to AM
TMANAM<CR>
ANFM
---Band set to FM
TMANFM<CR>
ANAUTO
---Tuning mode set to AUTO mode
TMANAUTO<CR>
ANMANUAL
---Tuning mode set to MANUAL mode
TMANMANUAL<CR>
※XM Control(North America model only)
EVENT PARAMETER
function example
TF XM*** (3 digits) --- ***:XM CH No. TFXM001<CR>
(XM001 CH)
TP XM**(PRESET No.) XM PRESET change to No.** TPXMA1<CR>
(PRESET No.”A1”)
XM CH NAME ********
(8 digit)
XM CH NAME change TMCH NAME 20 on 20<CR>
ARTIST
****************
(16 digit)
XM ARTIST NAME change TMARTIST EMINEM <CR>
TITLE
****************
(16 digit)
XM TITLE NAME change TMTITLE JUST LOSE IT <CR>
XMID ********
(8 digit)
XM RADIO ID(XM000 Selected) TMXMID J3JU703B<CR>
SIGNAL GOOD XM ANTENNA SIGNAL STATUS change TMSIGNAL GOOD<CR>
SIGNAL WEAK TMSIGNAL WEAK<CR>
SIGNAL MARGINAL TMSIGNAL MARGINAL<CR>
SIGNAL NOSIGNAL TMSIGNAL NOSIGNAL<CR>