Denon AVR-789 User Manual

0
Getting Started Connections Playback Remote Control Multi-zone Information Troubleshooting
ENGLISH
Specifications
0
Getting Started Connections Playback Remote Control Multi-zone Information Troubleshooting
ENGLISH
Surround Modes
q Standard Playback
This is the mode for enjoying surround sound according to the
program source.
Surround Playback of 2-channel Sources
Selecting the surround mode
Select by turning <SELECT/ENTER> or pressing [STD].
The mode switches each time the [D/ST] is pressed.
[Selectable items]
DOLBY PLgx
or
DOLBY PLg
z
: The signals are decoded in DOLBY PLgx or DOLBY
PLg for playback.
DTS NEO:6
: The signals are decoded in DTS NEO:6 for
playback.
neural
: It is possible to play analog input signals and PCM
(2-channel, 48 kHz or less) in the surround mode.
This is the optimum mode for playing sources
recorded in XM HD Surround (vpage 71).
z
: DOLBY PLgx can be selected when surround back speakers are
being used.
DOLBY PL
g can be selected when surround back speakers are
not being used.
Select the mode to suit the source
Select the “Cinema”, “Music”, “Game” and “Pro Logic” modes at
menu “Parameter” – “Surround Parameter” – “Mode” (vpage
43).
n DOLBY PLgx or DOLBY PLg
Cinema
: This mode is suited for movie sources.
Music
: This mode is suited for music sources.
Game
: This mode is suited for games.
Pro Logic
: This is the Pro Logic playback mode. This can be
selected when playing with a DOLBY PLg decoder.
When this mode is selected, “DOLBY PL” is
displayed.
n DTS NEO:6
Cinema
: This mode is suited for movie sources.
Music
: This mode is suited for music sources.
<SELECT/ENTER>
[STD]
[SIMU][D/ST]
[PURE]
[Rear]
Button located on both the main unit and the remote control
unit BUTTON
Button only on the main unit <BUTTON>
Button only on the remote control unit [BUTTON]
Symbols used to indicate buttons in this manual
Setup

Denon AVR-789 Specifications

General

Brand	Denon
Model	AVR-789
Category	Receiver
Language	English