o
Surround
Set the presence and size of the surround speakers.
Large:
Use a large speaker that can adequately
play back very low bass frequencies.
Small
(Default):
Use a small speaker that has inadequate
playback capacity for very low bass
frequencies.
None:
Select when the surround speakers are
not connected.
0
When “Surround” is set to “None”, “Surr. Back”, “Front Wide”, “Surround
Dolby” and “Back Dolby” are automatically set to “None”.
o
Surr. Back
Set the presence, size and number of surround back speakers.
Large:
Use a large speaker that can adequately
play back very low bass frequencies.
Small
(Default):
Use a small speaker that has inadequate
playback capacity for very low bass
frequencies.
None:
Select when the surround back speakers
are not connected.
2 spkrs
(Default):
Use two surround back speakers.
1 spkr:
Use only one surround back speaker.
Connect to the L terminal to SURROUND
BACK when this setting is selected.
0
When “Surr. Back” is set to “None” or “1 spkr”, “Back Dolby” is automatically
set to “None”.
Contents Connections Playback Settings Tips Appendix
243
Front panel Display Rear panel Remote Index
To Next Page
Loading...
Need help?
General
