General
Make various other settings.
Language
Set the language for display the menu on the TV screen.
English / Français / Español (Default: English)
0
“Language” can also be set up by the following operation. However, the menu
screen is not displayed. Watch the display while configuring the settings.
1. Press and hold the main unit’s STATUS and ZONE3 SOURCE at the same time
for at least 3 seconds.
“zVideo Format <NTSC>” appears on the display.
2.
Use u or i on the main unit twice.
“zGUI Language <ENGLISH>” appears on the display.
3.
Use the main unit’s o or p and set the language.
4. Press the main unit’s ENTER to complete the setting.
ECO
Configure the ECO Mode and auto standby mode settings.
o
ECO Mode
This mode can reduce the power consumption and heat generation of
your AV receiver when power on.
This is done by reducing the power supply line to the power amplifier,
in turn the maximum power output.
Contents Connections Playback Settings Tips Appendix
263
Front panel Display Rear panel Remote Index
To Next Page
Loading...
Need help?
General
