o
Auto Standby
Set so the unit power automatically switches to standby.
n
MAIN ZONE
Sets the time for switching to auto standby when there are no audio or
video signals input into this unit.
Before the unit enters standby mode, “Auto Standby” is displayed on
the unit display and the menu screen.
60 min:
The unit goes into standby after 60 minutes.
30 min:
The unit goes into standby after 30 minutes.
15 min:
The unit goes into standby after 15 minutes.
Off
(Default):
The unit does not go into standby
automatically.
n
ZONE2 / ZONE3
When there are no operations for a certain period of time as set here,
the power is automatically shut off even if there is audio or video input.
8 hours:
Switches ZONE2/ZONE3 the standby
state after about 8 hours.
4 hours:
Switches ZONE2/ZONE3 to the standby
state after about 4 hours.
2 hours:
Switches ZONE2/ZONE3 to the standby
state after about 2 hours.
Off
(Default):
Does not automatically switch ZONE2/
ZONE3 to the standby state.
Contents Connections Playback Settings Tips Appendix
266
Front panel Display Rear panel Remote Index
To Next Page
Loading...
Need help?
General
