o
Notifications
Displays and sets notifications.
Also, sets whether or not to display the notification when the power is
turned on.
Notification Alerts
On
(Default):
Notification messages are displayed.
Off: Notification messages are not displayed.
0
Press INFO on the remote control unit to display current source name, volume,
sound mode name, and other information at the bottom of the screen.
.
AUDYSSEY
SIGNAL
EXTLFE
SB
SBRSBL
C FR
FHR SW
FL
FHL
SRSL
SBRSBL
C FRFL
SRSL
INPUT SIGNAL ACTIVE SPEAKERS
SOUND
SOURCE
FWRFWL
Dynamic EQ : On
MultEQ XT32 : Reference
Dynamic Volume : Medium
Dolby TrueHD
50.0
Dolby TrueHD
Blu-ray
Remote ID
Set when you operate another Denon AV amplifier with the remote control
unit of this unit. Match the remote control unit you are using with the
remote ID of this unit.
o
Settings
1
Press ZONE SELECT to switch the zone mode.
The J indicator lights.
2
Press SETUP.
The menu is displayed on the TV screen.
3
Use ui to select “General”, then press ENTER.
4
Use ui to select “Remote ID”, then press ENTER.
5
Change the ID for the remote control unit. (v p. 293)
6
Press ENTER.
The Remote ID for this unit is set to the same ID as the one for the
remote control unit.
Contents
Connections Playback Settings Tips Appendix
275
Front panel Display Rear panel Remote Index
To Next Page
Loading...
Need help?
General
