1
Press and hold RC SETUP for more than 3 seconds.
“SETUP” and p indicator flashes twice on the remote control unit.
2
Use ui to display “MACRO” on the remote control unit
and press ENTER.
3
Use ui to display “AUTO” on the remote control unit
and press ENTER.
4
When “MCNo” appears on the remote control unit,
press the MACRO A – D button that you want to set.
5
Use ui to set the auto macro operation and press
ENTER.
“OK” flashes four times on the remote control unit and the normal
operation mode is restored.
Remote control
unit display
Auto MACRO
MOVIE Automatically turns on the devices and starts playback
when you watch movies.
TV power ON
Blu-ray power ON
AVR Power ON
Source Change “Blu-ray”
Playback Blu-ray Disc
MUSIC Automatically turns on the devices and starts playback
when you listen to music.
CD power ON
AVR Power ON
Source Change “CD”
Playback CD
WATCH Automatically turns on the devices and starts playback
when you watch TV (CBL/SAT).
TV power ON
CBL/SAT Power ON
AVR Power ON
Source Change “CBL/SAT”
ON Turns on all the devices set for PRESET.
All device power on
OFF Turns off all the devices set for PRESET.
All device power off
Contents Connections Playback Settings Tips Appendix
289
Front panel Display Rear panel Remote Index
To Next Page
Loading...
Need help?
General
