EasyManuals Logo

Denon AVR-S910W Owner's Manual

Denon AVR-S910W
296 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #230 background imageLoading...
Page #230 background image
Tips
I want the volume not to become too loud by mistake
0
Set the volume upper limit for “Volume Limit” in the menu beforehand. This prevents children or others from increasing the volume too much by mistake.
You can set this for each zone. (“Volume” (v p. 161), “Volume Limit” (v p. 220))
I want to keep the volume at the same level when I turn the power on
0
By default, the volume setting when power was previously set to standby on this unit is applied at next power on with no change. To use a fixed volume
level, set the volume level at power on for “Power On Volume” in the menu. You can set this for each zone. (“Volume” (v p. 161), “Power On
Volume” (v p. 220))
I want to have the subwoofer always output audio
0
Depending on the input signals and sound mode, the subwoofer may not output audio. When “Subwoofer Mode” in the menu is set to “LFE+Main”, you
can have the subwoofer always output audio. (v p. 205)
I want to make human voices in the movies clearer
0
Use “Dialog Level Adjust” in the menu to adjust the level. (v p. 155)
I want to keep bass and clarity during playback at a lower volume level
0
Set “Dynamic EQ” in the menu to “On”. This setting corrects the frequency characteristics to allow you to enjoy clear sound without the bass being lost
even during playback at a lower volume level. (v p. 163)
I want to automatically adjust the volume level difference in content such as TV and movies
0
Set “Dynamic Volume” in the menu. Volume level changes (between quiet scenes and loud scenes) in TV shows or movies are automatically adjusted
to your desired level. (v p. 164)
Contents
Connections Playback Settings Tips Appendix
230
Front panel Display Rear panel Remote Index

Table of Contents

Other manuals for Denon AVR-S910W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-S910W and is the answer not in the manual?

Denon AVR-S910W Specifications

General IconGeneral
Receiver typeSurround
Audio output channels7.2 channels
Power output per channel (1KHz@6 Ohm)185 W
Power output per channel (20-20KHz@8 Ohm)- W
HDMI in8
Composite video in2
Digital audio coaxial in1
Wi-FiYes
AM band range520 - 1710 kHz
FM band range87.5 - 107.9 MHz
Supported radio bandsAM, FM
Internet radio services supportedPandora, SIRIUS Internet Radio, Spotify
Optical drive includedNo
Display-
Product colorBlack
Audio decodersDolby Surround, Dolby TrueHD
AC input voltage120 V
Power consumption (standby)0.1 W
Power consumption (typical)500 W
Audio formats supportedAAC, ALAC, FLAC, MP3, WAV, WMA
Weight and Dimensions IconWeight and Dimensions
Depth337.82 mm
Width434.34 mm
Height167.64 mm
Weight9389 g

Related product manuals