EasyManuals Logo

Denon AVR-S910W Owner's Manual

Denon AVR-S910W
296 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #252 background imageLoading...
Page #252 background image
0
Auto Lip Sync
This function can automatically correct delay between the audio and
video.
Use a TV that is compatible with the Auto Lip Sync function.
0
HDMI Pass Through
Even when the power to this unit is set to standby, signals input from
the HDMI input connector are output to a TV or other device that is
connected to the HDMI output connector.
0
HDMI Control
If you connect the unit and an HDMI control function compatible TV or
player with an HDMI cable and then enable the HDMI control function
setting on each device, the devices will be able to control each other.
0
Power off link
This unit power off can be linked to the TV power off step.
0
Audio output destination switching
From the TV, you can switch whether to output audio from the TV or
the AV amplifier.
0
Volume adjustment
You can adjust this unit’s volume in the TV volume adjustment
operation.
0
Input source switching
You can switch this unit input sources through linkage to TV input
switching.
When playing the player, this unit input source switches to the
source for that player.
0
ARC (Audio Return Channel)
This function transmits audio signals from the TV to this unit through
the HDMI cable and plays back the audio from the TV on this unit
based on the HDMI control function.
If a TV without the ARC function is connected via HDMI connections,
video signals of the playback device connected to this unit are
transmitted to the TV, but this unit can not play back the audio from the
TV. If you want to enjoy surround audio for TV program, a separate
audio cable connection is required.
In contrast, if a TV with the ARC function is connected via HDMI
connections, no audio cable connection is required. Audio signals from
the TV can be input to this unit through the HDMI cable between this
unit and the TV. This function allows you to enjoy surround playback
on this unit for the TV.
Contents
Connections Playback Settings Tips Appendix
252
Front panel Display Rear panel Remote Index

Table of Contents

Other manuals for Denon AVR-S910W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-S910W and is the answer not in the manual?

Denon AVR-S910W Specifications

General IconGeneral
Receiver typeSurround
Audio output channels7.2 channels
Power output per channel (1KHz@6 Ohm)185 W
Power output per channel (20-20KHz@8 Ohm)- W
HDMI in8
Composite video in2
Digital audio coaxial in1
Wi-FiYes
AM band range520 - 1710 kHz
FM band range87.5 - 107.9 MHz
Supported radio bandsAM, FM
Internet radio services supportedPandora, SIRIUS Internet Radio, Spotify
Optical drive includedNo
Display-
Product colorBlack
Audio decodersDolby Surround, Dolby TrueHD
AC input voltage120 V
Power consumption (standby)0.1 W
Power consumption (typical)500 W
Audio formats supportedAAC, ALAC, FLAC, MP3, WAV, WMA
Weight and Dimensions IconWeight and Dimensions
Depth337.82 mm
Width434.34 mm
Height167.64 mm
Weight9389 g

Related product manuals