EasyManuals Logo

Denon AVR-S960H User Manual

Denon AVR-S960H
279 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #231 background imageLoading...
Page #231 background image
No sound comes out
No sound comes out of speakers.
0
Check the connections for all devices. (v p. 37)
0
Insert connection cables all the way in.
0
Check that input connectors and output connectors are not reversely connected.
0
Check cables for damage.
0
Check that speaker cables are properly connected. Check that cable core wires come in contact with the metal part on speaker terminals. (v p. 37)
0
Securely tighten the speaker terminals. Check speaker terminals for looseness. (v p. 37)
0
Check that a proper input source is selected. (v p. 67)
0
Adjust the volume. (v p. 68)
0
Cancel the mute mode. (v p. 68)
0
Check the digital audio input connector setting. (v p. 176)
0
Check the digital audio output setting on the connected device. On some devices, the digital audio output is set to off by default.
0
When a headphone is plugged into the PHONES jack on the main unit, sound is not output from the speaker terminal and PRE OUT connector.
0
Audio is output to your Bluetooth headphones, but not to speakers or pre-outs when “Output Mode” set to “Bluetooth Only”. Change “Output Mode” to
“Bluetooth + Speakers” to output audio from your Bluetooth headphones as well as your speakers or pre-outs. (v p. 213)
No sound comes out when using the DVI-D connection.
0
When this unit is connected to a device equipped with a DVI-D connector, no sound is output. Make a separate audio connection.
Contents
Connections Playback Settings Tips Appendix
231
Front panel Display Rear panel Remote Index

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-S960H and is the answer not in the manual?

Denon AVR-S960H Specifications

General IconGeneral
DisplayVFL
HDCP version2.3
Apple dockingNo
Product colorBlack
Audio decodersDTS Virtual:X, DTS:X
Volume controlRotary
Receiver typestereo
Frequency range10 - 100000 Hz
Input sensitivity200 mV
Audio output channels7.2 channels
Signal-to-Noise Ratio (SNR)100 dB
Total Harmonic Distortion (THD)0.08 %
Power output per channel (1KHz@6 Ohm)145 W
Power output per channel (20-20KHz@8 Ohm)95 W
Connectivity technologyWired & Wireless
Speakers connectivity typeRCA
AC input voltage230 V
AC input frequency50 Hz
Power consumption (standby)0.1 W
Power consumption (typical)460 W
Package weight11500 g
AM band range520 - 1710 kHz
FM band range87.5 - 107.9 MHz
Supported radio bandsAM, FM
HDMI in7
Audio (L/R) in4
Digital audio optical in2
Ethernet LAN (RJ-45) ports1
3D-
Package depth429 mm
Package width520 mm
Package height243 mm
Weight and Dimensions IconWeight and Dimensions
Depth330 mm
Width434 mm
Height167 mm
Weight9500 g

Related product manuals