Denon AVR-X1200W User Manual

z1
This item can be selected when using any of the Surround Back, Front Height, Top Front, Top Middle, Front Dolby or Surround Dolby speaker.
z2
This item can be selected when surround back speakers are used.
z3
This item can be selected when the input signal is DTS-HD Master Audio.
z4
This item can be selected when the input signal is DTS-HD Hi Resolution.
z5
This item can be selected when the input signal is DTS 96/24.
z6
This can be selected when the Dolby Atmos signal contains the Dolby TrueHD signal.
z7
This can be selected when the Dolby Atmos signal contains the Dolby Digital Plus signal.
z8
The default sound mode for the AirPlay playback is “Direct”.
z9
This item can be selected when the input signals contain surround back signals.
z10
This can be selected when the Dolby Atmos signal contains the Dolby TrueHD or Dolby Digital Plus signal.
Contents Connections Playback Settings Tips Appendix
249
Front panel Display Rear panel Remote Index

Denon AVR-X1200W Specifications

General

HDMI in	6
AC (power) in	Yes
Composite video in	2
USB ports quantity	1
Digital audio coaxial in	0
Receiver type	-
Audio output channels	7.2 channels
Total Harmonic Distortion (THD)	1 %
Power output per channel (20-20KHz@8 Ohm)	145 W
FM band range	87.5 - 108 MHz
Supported radio bands	AM, FM
Internet radio services supported	Spotify
Product color	Black
Audio decoders	DTS-HD Master Audio
Apple docking compatibility	iPhone, iPod
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.5 W
Power consumption (typical)	430 W
Connectivity technology	Wired
Optical drive included	No
Audio formats supported	AIFF, ALAC, FLAC

Weight and Dimensions

Depth	339 mm
Width	434 mm
Height	151 mm
Weight	8500 g