Check item(1.). : Checking the HDMI connector
Checking the condition of the HDMI pin (rear/front).
Check for deformed pins.
OK NG
Check by following the ow chart for "3. Starting detecting the point of failure".
NOTE :
After checking troubleshooting "3. HDMI/DVI", check "3. Starting detecting the point of failure".
HDMI "Rx/Tx" Failure Detection
1. Prior checking
None of the pins are deformed.
There are deformed pins.
Replace the HDMI connector.
Before Servicing
This Unit
Electrical Mechanical Repair Information Updating
82
To Next Page
Loading...
