Denon AVR-X250BT User Manual

Menu map
When using menu operations, connect this unit to a TV and operate this unit while viewing the TV.
The recommended settings are configured for this unit by default. You can customize this unit based on your existing system and your preferences.
Setting items Detailed items Description Page
.
Audio
Surr.Parameter Adjusts surround sound parameters. 71
Restorer Expands the low and high frequency components of compressed audio content such as
MP3 files to enable richer audio playback.
74
Audio Delay Compensates for incorrect timing between video and audio. 75
Volume Make volume settings. 75
.
Video
HDMI Audio Out Select HDMI audio output device. 77
HDMI PassThrough Selects how this unit will pass HDMI signals to the HDMI output in standby power mode. 77
Pass Source Sets the HDMI connector that inputs HDMI signals when in standby. 78
HDMI Control You can link operations with devices connected to HDMI and compatible with HDMI
Control.
78
ARC On the TV connected to the HDMI MONITOR connector, set whether to receive sound
from the TV via HDMI.
79
TV Audio Switching Sets automatic switching to the “TV Audio” input when a TV connected via HDMI sends
an appropriate CEC control command to this unit.
79
Pow.Off Control Links the power standby of this unit to external devices. 80
Contents Connections Playback Settings Tips Appendix
67
Front panel Display Rear panel Remote Index

Denon AVR-X250BT Specifications

General

Impedance	16 Ω
Receiver type	Surround
Frequency range	10 - 100000 Hz
Pre-out connectivity	Yes
Audio output channels	5.1 channels
Signal-to-Noise Ratio (SNR)	98 dB
Total Harmonic Distortion (THD)	1 %
Power output per channel (1KHz@6 Ohm)	90 W
Power output per channel (1KHz@8 Ohm)	70 W
Power output per channel (20-20KHz@8 Ohm)	130 W
AirPlay	No
Display	VFD
HDCP version	2.2
Product color	Black
Audio decoders	DTS-HD, DTS-HD Master Audio, Dolby Pro Logic II, Dolby TrueHD
HDMI in	5
Composite video in	2
Digital audio coaxial in	-
Supported graphics resolutions	3840 x 2160
AM band range	522 - 1611 kHz
FM band range	87.5 - 108 MHz
Supported radio bands	AM, FM
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.5 W
Power consumption (typical)	330 W
Number of HDMI outputs	1
Connectivity technology	Wired & Wireless
Speakers connectivity type	Clamp terminals

Weight and Dimensions

Depth	319 mm
Width	434 mm
Height	151 mm
Weight	7500 g