Denon AVR-X250BT User Manual

o
Contents
Tips
I want the volume not to become too loud by mistake 94
I want to keep the volume at the same level when I turn the power
on 94
I want to have the subwoofer always output audio 94
I want to combine a desired video with the current music 94
Troubleshooting
Power does not turn on / Power is turned off 96
Operations cannot be performed through the remote control unit 97
Display on this unit shows nothing 97
No sound comes out 98
Desired sound does not come out 99
Sound is interrupted or noise occurs 101
No video is shown on the TV 102
The menu screen is not displayed on the TV 103
Bluetooth cannot be played back 104
The HDMI control function does not work 105
Contents Connections Playback Settings Tips Appendix
93
Front panel Display Rear panel Remote Index

Denon AVR-X250BT Specifications

General

Impedance	16 Ω
Receiver type	Surround
Frequency range	10 - 100000 Hz
Pre-out connectivity	Yes
Audio output channels	5.1 channels
Signal-to-Noise Ratio (SNR)	98 dB
Total Harmonic Distortion (THD)	1 %
Power output per channel (1KHz@6 Ohm)	90 W
Power output per channel (1KHz@8 Ohm)	70 W
Power output per channel (20-20KHz@8 Ohm)	130 W
AirPlay	No
Display	VFD
HDCP version	2.2
Product color	Black
Audio decoders	DTS-HD, DTS-HD Master Audio, Dolby Pro Logic II, Dolby TrueHD
HDMI in	5
Composite video in	2
Digital audio coaxial in	-
Supported graphics resolutions	3840 x 2160
AM band range	522 - 1611 kHz
FM band range	87.5 - 108 MHz
Supported radio bands	AM, FM
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.5 W
Power consumption (typical)	330 W
Number of HDMI outputs	1
Connectivity technology	Wired & Wireless
Speakers connectivity type	Clamp terminals

Weight and Dimensions

Depth	319 mm
Width	434 mm
Height	151 mm
Weight	7500 g