EasyManuals Logo
Home>Denon>Receiver>AVR-X520BT

Denon AVR-X520BT User Manual

Denon AVR-X520BT
127 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #105 background imageLoading...
Page #105 background image
o
File names on the USB memory device are not displayed properly
Symptom Cause / Solution Page
The file names are not
displayed properly (“...”,
etc.).
0
Characters that cannot be displayed have been used. On this unit, characters that cannot be displayed
are replaced with a “. (period)”.
o
Bluetooth cannot be played back
Symptom Cause / Solution Page
Bluetooth devices cannot
be connected to this unit.
0
The Bluetooth function in the Bluetooth device has not been enabled. See the Owner’s Manual of the
Bluetooth device to enable the Bluetooth function.
0
Bring the Bluetooth device near to this unit.
0
The Bluetooth device cannot connect with this unit if it is not compatible with the A2DP profile.
0
Turn the power of the Bluetooth device off and on again, and then try again.
The sound is cut off.
0
Bring the Bluetooth device near to this unit.
0
Remove obstructions between the Bluetooth device and this unit.
0
To prevent electromagnetic interference, locate this unit away from microwave ovens, wireless LAN
devices and other Bluetooth devices.
0
Reconnect the Bluetooth device.
Contents Connections Playback Settings Tips Appendix
105
Front panel Display Rear panel Remote Index

Table of Contents

Other manuals for Denon AVR-X520BT

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-X520BT and is the answer not in the manual?

Denon AVR-X520BT Specifications

General IconGeneral
Receiver typeSurround
Frequency range10 - 100000 Hz
Input sensitivity200 mV
Pre-out connectivityYes
Audio output channels5.1 channels
Signal-to-Noise Ratio (SNR)98 dB
Power output per channel (1KHz@6 Ohm)90 W
Power output per channel (20-20KHz@8 Ohm)70 W
HDMI in5
Composite video in2
USB ports quantity1
Digital audio coaxial in-
Connectivity technologyWired
Speakers connectivity typeClamp terminals
Ethernet LANNo
AM band range552 - 1611 kHz
FM band range87.5 - 107.9 MHz
Supported radio bandsAM, FM
Product colorBlack
Audio decodersDolby TrueHD, DTS 96/24, DTS-HD, DTS-HD Master Audio
AC input voltage230 V
AC input frequency50 Hz
Power consumption (standby)0.3 W
Power consumption (typical)330 W
Weight and Dimensions IconWeight and Dimensions
Depth319 mm
Width434 mm
Height151 mm
Weight7500 g

Related product manuals