Do you have a question about the Denon AVR-X3200W and is the answer not in the manual?
Receiver type | Surround |
---|---|
Input sensitivity | 200 mV |
Audio output channels | 7.2 channels |
Signal-to-Noise Ratio (SNR) | 100 dB |
Power output per channel (1KHz@6 Ohm) | 180 W |
Power output per channel (20-20KHz@8 Ohm) | 105 W |
HDMI in | 8 |
Audio (L/R) in | 5 |
Composite video in | 3 |
USB ports quantity | 1 |
Component video (YPbPr/YCbCr) in | 2 |
12V trigger | Yes |
Speakers connectivity type | - |
AM band range | 522 - 1611 kHz |
FM band range | 87.5 - 108 MHz |
Supported radio bands | AM, FM |
Internet radio services supported | vTuner |
Optical drive included | No |
Display | LCD |
Product color | Black |
Audio decoders | DTS-HD Master Audio, Dolby Surround, Dolby TrueHD |
AC input voltage | 230 V |
AC input frequency | 50 Hz |
Power consumption (typical) | 650 W |
Depth | 388 mm |
---|---|
Width | 434 mm |
Height | 167 mm |
Weight | 11300 g |
Details support for 4K/60Hz, HDR, and HDCP 2.2, and image processing capabilities.
Identifies and explains the controls and indicators on the front of the AV receiver.
Identifies and explains the various input and output connectors on the rear of the AV receiver.
Details the functions and layout of the included remote control for operating the unit.
Guides on how to install and connect various speaker configurations for optimal sound.
Details connecting a TV with HDMI and ARC support for audio return.
Explains how to set up and connect the receiver via Wi-Fi for network access.
Instructions on how to power the unit on and off using the power button.
Provides an overview of the available settings and their corresponding page numbers.
Step-by-step guide to enable and configure HDMI control for device integration.
Detailed steps for performing automatic speaker calibration for optimal sound.
Instructions to restore the unit to its default factory settings.
Lists the technical specifications of the AV receiver, including audio and video parameters.