Denon AVR-X520BT User Manual

o
Operations accessible through the option
menu
0
“RDS search” (v p. 47)
0
“PTY search” (v p. 48)
0
“TP search” (v
p. 49)
0
“Radio Text” (v p. 49)
0
“Tuning in to stations and presetting them automatically (Auto
Preset)” (v p. 50)
0
“Skipping preset broadcast stations (Preset Skip)” (v p. 52)
0
“Adjusting the tone (Tone)” (v p. 55)
0
“Displaying your desired video during audio playback (Video
Select)” (v
p. 57)
RDS search
RDS (works only on the FM band) is a broadcasting service which allows
a station to send additional information along with the regular radio
program signal.
Use this function to automatically tune to FM stations that provide the RDS
service.
Note that the RDS function only works when receiving RDS compatible
stations.
1
Press FM to switch the input source to “Tuner”.
2
Press SEARCH to select “RDS”.
3
Use CHANNEL + or CHANNEL -.
The search for RDS stations begins automatically.
Contents Connections Playback Settings Tips Appendix
47
Front panel Display Rear panel Remote Index

Denon AVR-X520BT Specifications

General

Receiver type	Surround
Frequency range	10 - 100000 Hz
Input sensitivity	200 mV
Pre-out connectivity	Yes
Audio output channels	5.1 channels
Signal-to-Noise Ratio (SNR)	98 dB
Power output per channel (1KHz@6 Ohm)	90 W
Power output per channel (20-20KHz@8 Ohm)	70 W
HDMI in	5
Composite video in	2
USB ports quantity	1
Digital audio coaxial in	-
Connectivity technology	Wired
Speakers connectivity type	Clamp terminals
Ethernet LAN	No
AM band range	552 - 1611 kHz
FM band range	87.5 - 107.9 MHz
Supported radio bands	AM, FM
Product color	Black
Audio decoders	Dolby TrueHD, DTS 96/24, DTS-HD, DTS-HD Master Audio
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.3 W
Power consumption (typical)	330 W

Weight and Dimensions

Depth	319 mm
Width	434 mm
Height	151 mm
Weight	7500 g