Denon AVR-X580BT User Manual

Sound modes and surround parameters
Restorer
z3
z1
z2
SSz4
S
Stereo
SSS
S
SS
Multi Ch In
S S
Dolby Pro Logic g SS SSS SS
DTS Neo:6
SS SSS
Dolby Digital
SS S
Dolby Digital Plus
SS S
Dolby TrueHD
SS
DTS Surround
SS S
DTS-HD
SS
Multi Ch Stereo
SS SS
Virtual
SS SS
Subwoofer
Direct/Pure Direct (2-channel)
Direct/Pure Direct (Multi-channel)
Sound mode
Surround Parameter
Dynamic
Compression
Low Frequency
Eects
Tone
Pro Logic g Music mode only
Neo:6 Music
mode only
Panorama Dimension Center Width Center Image
Mode
z1
This item can be selected when Dolby Digital or DTS signal is played.
z2
This item can be selected when Dolby Digital or DTS signal or DVD-Audio is played.
z3
This item can be set when the input signal is analog, PCM 48 kHz or 44.1 kHz.
z4 This setting is available when “Subwoofer Output” in the menu is set to “LFE+Main”. (v p. 100)
Contents
Connections Playback Settings Tips Appendix
135
Front panel Display Rear panel Remote Index

Denon AVR-X580BT Specifications

General

Channels	5.2
Power Output (6 ohm, 1 kHz, 0.7% 2ch Drive)	90W
HDMI Inputs	5
HDMI Outputs	1
4K Pass-through	Yes
4K/60Hz Pass-through	Yes
4K/120Hz Pass-through	No
HDR Support	HDR10, HLG
Bluetooth	Yes
Dolby Vision	Yes
Audio Return Channel (ARC)	Yes
HDMI 2.1	No
HDCP 2.3 support	Yes
FM Tuner	Yes
AM Tuner	Yes
Wi-Fi	No
Dolby Atmos	No
DTS:X	No
Auto Speaker Calibration	No
Dimensions (W x H x D)	434 x 151 x 319 mm
Power Output per Channel	70W (8 ohms, 20 Hz - 20 kHz, 0.08% 2ch driven)
Dolby Audio	Dolby Digital, Dolby Digital Plus, Dolby TrueHD
DTS Audio	DTS-HD Master Audio