To Next PageTo Next Page
Need help?Do you have a question about the Denon AVR-X6200W and is the answer not in the manual?
General| Display | VFL |
|---|---|
| Product color | Silver |
| RS-232 ports | 1 |
| 12V trigger ports quantity | 2 |
| Speakers connectivity type | RCA |
| HDMI in | 8 |
| Composite video in | 5 |
| Receiver type | Surround |
| Frequency range | 10 - 100000 Hz |
| Pre-out channels | 13.2 |
| Input sensitivity | 200 mV |
| Audio output channels | 9.2 channels |
| Signal-to-Noise Ratio (SNR) | 102 dB |
| Power output per channel (1KHz@6 Ohm) | 205 W |
| Power output per channel (20-20KHz@8 Ohm) | 140 W |
| Number of HDMI outputs | 3 |
| AC input voltage | 230 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 0.1 W |
| Power consumption (typical) | 730 W |
| AM band range | 522 - 1611 kHz |
| FM band range | 87.5 - 108 MHz |
| Supported radio bands | AM, FM |
| Internet radio services supported | Spotify |
| 3D | - |
| Supported graphics resolutions | 4096 x 2160 |
| Card reader integrated | No |
| Audio formats supported | AAC, AIFF, ALAC, FLAC, MP3, WAV |
| Image formats supported | JPG |
Weight and Dimensions| Depth | 383 mm |
|---|---|
| Width | 434 mm |
| Height | 167 mm |
| Weight | 14100 g |
Explains how to use the search function and magnify diagrams in Acrobat Reader.
Details on performing leakage current and resistance checks before returning the set.
Highlights special properties of parts and the need for designated replacements.
Details on power amplifier rated output, input sensitivity, frequency response, and S/N ratio.
Specifications for reception frequency range, effective sensitivity, S/N ratio, and distortion.
Details on network type, security, radio frequency, and channels.
Specifications for communication system, transmission power, and supported profiles.
Information on power supply, power consumption, and standby modes.
Procedure to initialize the unit after replacing the microcomputer or digital PCB.
Information on using extension cable kits for PCB repair.
Step-by-step procedure for removing the front panel assembly.
Procedure for removing the radiator assembly.
Procedure for removing the SMPS assembly.
Procedure for removing the power transformer.
Procedure for removing the back panel assembly.
Details on how to enter various special modes using front panel buttons.
Explains that version information is displayed when the device starts in this mode.
Step-by-step instructions on how to activate the Version Display Mode.
Details the order in which different version information is displayed.
Explains how to select diagnostic, protection history, or 232C standby clear modes.
Instructions on how to start the service-related modes.
Describes how to navigate and select modes using the cursor buttons.
Explains the function for confirming problem paths and executing checks after repair.
Instructions on how to start the diagnostic mode.
Procedure to cancel the diagnostic mode.
How to switch between video and audio items using buttons.
Lists audio system paths and their confirmation details.
Shows the block diagram of the digital PCB for audio and network functions.
Illustrates the block diagram of the digital PCB for video signals.
Troubleshooting steps for power-related issues.
Troubleshooting steps for HDMI input/output issues.
Troubleshooting steps for audio output issues.
Troubleshooting steps for connectivity issues.
Procedure for adjusting the idling current.
Details the available sound modes and their corresponding audio channel outputs.
Shows the block diagram for audio processing and zone configurations.
Illustrations of the digital PCB layout from the A side.
Illustrations of the digital PCB layout from the B side.
Illustrations of the HDMI USB front panel PCB from the A side.
Illustrations of the HDMI USB front panel PCB from the B side.
Schematic diagram for digital connections.
Lists major ICs with their functions and pin details.
Pin configuration and terminal functions for the R5F56108VNFP IC.
