3. PANEL / REMOTE LOCK Selection Mode
3.1. Actions
Switch the PANEL LOCK and REMOTE LOCK modes between on and off.
3.2. Starting up
While holding down buttons "
STATUS
" and "
INFO
" simultaneously, press the power button to turn on the power.
Select the desired mode using the "
CURSOR
f
/
d
" button, then press the "
ENTER
" button to conrm.
3.3. Displaying and Selecting Each Mode
The information shown on the display switches each time the "
CURSOR
f
/
d
" button is pressed.
Press the "
ENTER
" button to set the currently displayed mode and restart the device.
The setting with "
*
" is selected for each mode.
q
FLD
L1
– F P / V O L L O C K * O N
L2
F P L O C K O N
The buttons on the unit and the master volume knob does not function.
w
FLD
L1
F P / V O L L O C K * O N
L2
– F P L O C K O N
The buttons on the unit does not function.
e
FLD
L1
F P L O C K O N
L2
– F P L O C K O F F
The PANEL LOCK mode is turned off.
r
FLD
L1
F P L O C K O F F
L2
– R C L O C K O n
The device cannot be operated by the remote control.
t
FLD
L1
R C L O C K O n
L2
– R C L O C K * O F F
The REMOTE LOCK mode is turned off.
74