o
Noise Reduction
Reduce overall video noise.
Low / Medium / High / Off (Default : Off)
o
Enhancer
Emphasize picture sharpness.
0 – +12 (Default : 0)
HDMI Setup
Make settings for HDMI video/audio output.
NOTE
0
When “HDMI Control” and “HDMI Pass Through” is set to “On”, it consumes more
standby power. (“HDMI Pass Through” (v p. 217), “HDMI
Control” (v
p. 217)) If you are not using this unit for an extended period, it is
recommended that you unplug the power cord from the power outlet.
o
Auto Lip Sync
Make automatic compensation for timing shift in audio and video
output.
On
(Default):
Correct automatically.
Off: Do not correct automatically.
Contents Connections Playback Settings Tips Appendix
215
Front panel Display Rear panel Remote Index
To Next Page
Loading...
