Denon AVR-X6200W - Page 244

7.1ch (Bi-Amp):
0
Setting to assign the power amplifiers in
this unit for front speaker bi-amp
connection to 2-channels.
0
You can connect speakers for up to 9.1-
channels for MAIN ZONE.
Speakers to output audio are automatically
switched for playing back up to 7.1-
channels in accordance with the input
signal and sound mode.
5.1ch (Bi-Amp) + ZONE2:
0
Setting to assign the power amplifiers in
this unit for front speaker bi-amp
connection to 2-channels.
0
Setting to assign the power amplifiers in
this unit for ZONE2 to 2-channels.
9.1ch/2ch Front:
0
Setting to assign the power amplifiers in
this unit for connecting 2-channel
playback speakers to 2-channels.
0
You can switch the front speakers when
using 2-channel playback in direct mode
or stereo mode, or when using multi-
channel surround playback.
When setting speakers for 2-channel
playback, also perform the “2ch Playback”
setting. (v p. 260)
7.1ch/2ch Front (Bi-Amp):
0
Setting to assign the power amplifiers in
this unit for the bi-amp connection of the
2-channel playback speakers to 4-
channels.
0
You can switch the front speakers when
using 2-channel playback in direct mode
or stereo mode, or when using multi-
channel surround playback.
When setting speakers for 2-channel
playback, also perform the “2ch Playback”
setting. (v p. 260)
Contents Connections Playback Settings Tips Appendix
244
Front panel Display Rear panel Remote Index