Denon AVR-X6200W - Page 246

o
Floor
n
Layout
Select the floor speakers location.
5ch & SB & FW：
This layout combines a surround back or
front wide speaker with the basic 5-
channel layout.
5ch & SB
(Default)：
This layout combines a surround back
speaker with the basic 5-channel layout.
5ch & FW：
This layout combines a front wide
speaker with the basic 5-channel layout.
5ch：
This is a basic 5-channel layout that uses
front speakers, center speakers and
surround speakers.
o
Height
n
Height Sp
Select the number of the height speakers and ceiling speakers used in
MAIN ZONE.
None： Uses no height and ceiling speakers.
2ch
(Default)：
Uses a set of (two) height speakers or
ceiling speakers.
4ch：
Uses two sets of (four) height speakers or
ceiling speakers.
Upgrade (Auro-3D)
5ch：
Uses five height speakers
z
z
If “5ch” is selected, connect the Top Surround speaker to the SUBWOOFER 2
terminal.
n
Dolby Sp
Select the number of the Dolby Atmos Enabled speakers used in MAIN
ZONE.
None
(Default)：
Uses no Dolby Atmos Enabled speakers.
2ch：
Uses a set of (two) Dolby Atmos Enabled
speakers.
4ch：
Uses two sets of (four) Dolby Atmos
Enabled speakers.
Contents Connections Playback Settings Tips Appendix
246
Front panel Display Rear panel Remote Index