Denon AVR-X6200W - Page 249

Upgrade (Auro-3D)
Settings AUDIO OUT connectors
Height Speakers Dolby Speakers NOTE Layout HEIGHT1 HEIGHT2 SUBWOOFER2
4ch None
z 1
Front Height & Surr. Height Front Height Surround Height -
Front Height & Rear Height z 5
Front Height Rear Height -
5ch None
z 4
Front Height & Surr. Height Front Height Surround Height Top Surround
Front Height & Rear Height z 5
Front Height Rear Height Top Surround
z1
This can be selected when “Assign Mode” is set to “11.1ch” or “9.1ch” in the menu.
z4
This can be selected when “Assign Mode” is set to “11.1ch” in the menu.
z5
You can use the Rear Height speakers instead of Surround Height speakers for Auro-3D playback. For best Auro-3D experience, using Surround Height speakers is
recommended.
Contents Connections Playback Settings Tips Appendix
249
Front panel Display Rear panel Remote Index