EasyManuals Logo

Denon AVR-X6400H User Manual

Denon AVR-X6400H
325 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #303 background imageLoading...
Page #303 background image
z1
This item can be selected when using any of the Surround Back, Front Height, Top Front, Top Middle, Top Rear, Rear Height, Front Dolby, Surround Dolby or Back Dolby
speaker.
z2
The default sound mode for the AirPlay playback is “Direct”.
z3
This can be selected when the Dolby Atmos signal contains the Dolby TrueHD signal.
z4
This item can be selected if the Auro-3D signal contains Dolby TrueHD.
z5
This can be selected when the Dolby Atmos signal contains the Dolby Digital Plus signal.
z6
This item can be selected when surround back speakers are used.
z7
This item cannot be selected when a DTS(-HD) format with a sampling frequency of over 48 kHz is input.
z8
This item cannot be selected when a DTS:X format with a sampling frequency of over 48 kHz is input.
z9
This item cannot be selected when the input signal is Dolby Digital, Dolby Digital Plus, Dolby TrueHD or Dolby Atmos.
z10
This item cannot be selected if the sampling frequency of the input signal is 32 kHz.
z11
This item can be selected when the input signal is DTS-HD Master Audio.
z12
This item can be selected if the Auro-3D signal contains DTS-HD Master Audio.
z13
This item can be selected when the input signal is DTS-HD Hi Resolution.
z14
This item can be selected when the input signal is DTS 96/24.
z15
This item can be selected if the Auro-3D signal contains Multi Channel PCM.
z16
This item can be selected when the input signals contain surround back signals.
z17
This can be selected when the Dolby Atmos signal contains the Dolby TrueHD or Dolby Digital Plus signal.
Contents
Connections Playback Settings Tips Appendix
303
Front panel Display Rear panel Remote Index

Other manuals for Denon AVR-X6400H

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-X6400H and is the answer not in the manual?

Denon AVR-X6400H Specifications

General IconGeneral
Receiver typeSurround
Frequency range10 - 100000 Hz
Pre-out channels11.2
Input sensitivity200 mV
Pre-out connectivityYes
Audio output channels11.2 channels
Signal-to-Noise Ratio (SNR)100 dB
Power output per channel (1KHz@6 Ohm)205 W
Power output per channel (20-20KHz@8 Ohm)140 W
Display-
HDCP version2.2
Apple dockingNo
Product colorSilver
Audio decodersDTS:X, Dolby Atmos
Audio formats supportedALAC, DSD, FLAC, WAV
RS-232 ports1
Connectivity technologyWireless
AM band range522 - 1611 kHz
FM band range87.5 - 108 MHz
Supported radio bandsAM, FM
Internet radio services supportedDeezer, Napster, Spotify, Tidal, TuneIn
HDMI in8
Composite video in4
Component video (YPbPr/YCbCr) in2
AC input voltage230 V
AC input frequency50 Hz
Power consumption (standby)0.5 W
Power consumption (typical)750 W
Number of HDMI outputs3
Weight and Dimensions IconWeight and Dimensions
Depth393 mm
Width434 mm
Height167 mm
Weight14500 g

Related product manuals