Playing analog input
1
Prepare for playback.
Check the connection, then turn on this units. (“Connecting an
analog device” (v p. 24))
2
Press PHONO/AUX to switch the input source to
“Phono” or “AUX”.
0
The input source is switched to “Phono” or “AUX” each time
PHONO/AUX is pressed.
3
Play the component connected to this unit.
Contents Connections Playback Settings Tips Appendix
74
Front/Top
panel
Rear panel
Remote control
unit
Index
To Next Page
Loading...
