Denon CEOL RCD-N8 User Manual

15
Setting the general [General]
n Update on web screen
Firmware can be updated using the “Web control function”
(vpage46).
“Web control function” (vpage 46) settings must be
completed in advance on a PC belonging to the same network.
For information on obtaining update files, please contact our
customer service center.
1
Click r from step 5 for the “Web control function”
(vpage 46).
The PC will display the following screen.
Wait for approximately 1 minute.
You can also gain access by entering the IP address shown by
the unit into a web browser.
Please wait...
FIRMWARE
Now,go to the new IP displayed in the body.
If do not move the page within 1 minute,please refer to IP.
GThe web displayH
GThe unit’s screen displayH
2
When the following screen is displayed by the PC,
click the “Choose File” (q) button, select the update
le, and click the “Upload” (w) button.
Firmware
Upload new firmware
Upload
Choose File
q
w
3
When the following screen is displayed, click the
“OK” (e) button.
Updating will begin.
Firmware
Warning:
Once started,the upload process cannot be interrupted or adorted,
in order to ensure the integrity of the Digital Media Player.
Are you sure you want to proceed?
OK
e
NOTE
Do not operate the unit while updating is in progress.
4
When the following screen is displayed, updating is
complete.
Firmware
New Firmware:
xxx.fw
Firmware upload status: 100% completed.
The upload process finished successfully.
Please close this.
Button names may vary depending on the OS language used on your
computer.
n Notification
Update
Displays a notification message on this unit’s menu screen when the
latest firmware is released with “Update”.
Connect to broadband Internet (vpage 9) when using this
function.
1
Press SETUP.
Turns on the Menu settings mode
and the Menu appears on the display
(vpage11 “Menu map”).
ADD
CALL
FAVORITE
SEARCH
. / ABC
a
/
A
DEF
GHI JKL
MNO
PQRS TUV WXYZ
*
1 2 3
4 5 6
7 8 9
+10 0
RC-1174
CH
- +
CH
TUNE +TUNE
-
ANALOG IN
TUNER DIGITAL IN
POWER
CLOCK DIMMERSLEEP
MUSIC
SERVER
INTERNET
RADIO
ONLINE
MUSIC
VOLUME
SDB
TONE
MUTE
TOP MENU INFO
MODE
CLEAR
USB
iPod CD
RANDOM
REPEAT PROGRAM
ENTER
SETUP
2
Use ui and ENTER to select
“General” – “Firmware” –
“Notication” – “Update”, then
press ENTER or p.
“Update Notification” menu appears.
3
Use ui to select “On”, then press ENTER or p.
On Display update message.
Off Do not display update message.
•When you press ENTER during display of the notification message,
the “Check for Update” is displayed. (Refer to page 14 for more
information on “Update”.)
•Press o to erase the notification message.
Preparations
Operations
Information
Preparations

Denon CEOL RCD-N8 Specifications

General

Brand	Denon
Model	CEOL RCD-N8
Category	Car Receiver
Language	English