• Connect the video signals directly to the TV and switch the picture on the TV.
• When making connections, also refer to the eperating instructiens of the ether components.
I Connection to the optical digital input terminal I
• Only audio signals are input to the optical digital input
terminal.
• Use a commercially available optical transmission
cable for connection to the optical transmission
terminal (OPTICAL).
Digital satellite/cable tuner
f-]
o_,O_L _u_
[ Connection of a digital satellite/cable tuner I
• For tuners equipped with an optical digital output terminal,
connect the digital output terminal to the DIGITAL D.AUX IN
terminal on the ADV-MB1 using an optical transmission cable.
• To connect the audio output terminals, use whatever of the
ADV-MBI's LINEN or LINE-2 terminals are open.
©
"iiii!
IC°nnecti°n of a video deck ]
•Connectthevideodeck'saudiooutputandaudioinput__ _
to whateve, of the ADV-M51's LINE-1 or LINE-2_ _ _ i/_
terminals are open using pin-plug cords.
terminals VJdeodeck
.... I
12
To Next Page
