Use this to automatically search for FM broadcasts and store up to 40 stations at [)reset channels 1 to 40.
NOTE:
• If an FM station cannot be [)reset automatically due to poor reception, use the "Manual tuning" operation to tune in the station, then [)reset it
using the manual "Preset memory" operation.
1 2
2
Using the TUNER function, press and
hold the MENU/SET button of the main
unit for 2 seconds or longer.
• "AUTO PRESET?" and "-: NO/+:
START" will alternately appear on the
display of the main unit.
• Press the TUNING - button to cancel.
MENU/SET%
Main unit
Use the TUNING + button to select
"START". +/"_
"SEARCH" flashes on the displav and
searching begins.
"COMPLETED" appears once searching is
completed. Main unit
I
Ip
1
Example: Listening to the station [)reset at number P03 (This operation is only possible from the remote control unit.)
Set the remote
control selector
switches to A/V
and TUNER.
(Z]Z3
_ C_D@ C_D
•_ The preset buttons on the remote control unit (TUNER CH "+" and
"-") can be used at any time.
1
Use the "+" and "-" [)reset buttons to select [)reset number
"3" or press the "3" button on the numeric keypad to display
preset number "P03".
÷ The "+" and "-" buttons on the main unit can be selected
when the preset mode has been set.
T_ER
Main unit Remote control unit
•_ The functions of the "+" and "-" buttons on the main unit change
according te whether the tuning or [)reset mode is set. When the
tuning mode is set, you can switch to the [)reset mode by pressing
the "+" button while pressing the BAND button.
Main unit Main unit
61
To Next Page
Loading...
