Denon DCD-1290 - Important to Safety; Safety Instructions

IMPORTANT TO SAFETY
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
CAUTION:
1, Handle the power supply cord carefully
Do not damage or deform the power supply cord. If it is damaged or
deformed, it may cause electric shock or malfunction when used. When
removing from wail outlet, be sure to remove by holding the plug
attachment and not by pulling the cord.
2. Do not open the top cover
In order to prevent electric shock, do not open the top cover.
If problems occur, contact your DENON DEALER.
3. Do not place anything inside
Do not place metal objects or spill liquid inside the CD player.
Electric shock or malfunction may result.
Please, record and retain the Mocel name and serial number of your set
shown on the rating label.
Mode! No. DCD-1290/2060/2060G Serial No.
CAUTION. -
RISK OF ELECTRIC SHOCK
| DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The lightning flash with arrowhead symbol within an
equilateral triangle is intended to alert the user of the
presence of uninsulated “dangerous voltage” within
A the product's enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle
is intended to alert the user of the presence of
A important operating and maintenance (servicing)
instruction in the literature accompanying the ap-
pliance.
CLASS
1
LASER
PRODUCT.
Ua
a
eet
ee
LUOKAN
1
LASERLAITE
KLASS 1 LASERAPPARAT “CLASS 1
f# LASER PRODUCT”
CLASS 1 LASER PRODUCT
LUOKAN 1 LASERLAITE
KLASS 1 LASERAPPARAT
AODVARSEL: USYNLIG LASERSTRALING VED ABANING
UNDGA UDSAETTELSE FOR STRALING.
LAITTEEN KAYTTAMINEN MUULLA KUIN TASSA
KAYTTOOHJEESA MAINITULLA TAVALLA SAATTAA
ALTISTAA KAYTTAJAN TURVALLISUUSLUOKAN 1
YUTTAVALLE NAKYMATTONIALLE LASERSATEILYLLE.
VAROITUS:
en eer = ANAT SATYT AN 1 DeENAA
on arearnateN anvanos PA
BRUKSANVISNING
SPECIFICERATS,
KAN
ANVANDAREN
UTSATTAS FOR OSYNLIG LASERS THALNING, 30M
QVERSKRIDER GRANGEN FOR LASERKLASE 4,
NOTE:
This CD player uses the semiconductor laser. To allow you to enjoy music
at a stable operation, it is recommended to use this in a room of 5°C (41°F)
— 35°C (95°F).
LABELS (for U.S.A. model only)
DENON AMERICA INC.
222 WEW ROAD, THIS PRODUCT COMPLIES WITH DHHS RULES
PARSIPPANY, H. J. ZICFR SUBCHAPTER | APPLICABLE AT DATE OF
07054 U.S.A} MANUFACTURE.
MANUFACTURED: ) Pastzeaamades
CERTIFICATION
DCD-1290 DENON «
60H2 |...
CAUTION:
USE OF CONTROLS OR ADJUSTMENTS OR REFORMANCE OF PROCE-
DURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
THE COMPACT DISC PLAYER SHOULD NOT BE ADJUSTED OR REPAIRED
BY ANYONE EXCEPT PROPERLY QUALIFIED SERVICE PERSONNEL.
NOTE:
This unit may cause interference to radio and television reception if
you do not operate it in strict accordance with this OPERATING
INSTRUCTIONS.
This unit complies with Class B computing device rules in accord-
ance with the specifications in Sub-part J or Part 15 of the FCC
Rules, which are designed to provide reasonable protection against
such interference in a residential installation. If the unit does cause
interference to any radio or television reception, try to reduce it by
one or more of the following means:
a) Turn the other unit to improve reception
b) Move this unit
c} Move this unit away from others
d) Plug this unit respectively into a different AC outlet
* This is note in accordance with Section 15.838 of the FCC Rules.
IMPORTANT (BRITISH MODEL ONLY)
The wires in this mains lead are coloured in accordance with the
following code:
Blue: Neutral Brown: Live
The colours of the wires in the mains lead of this apparatus may not
correspond with the coloured markings identifying the terminals in
your plug proceed as follows.
The wire which is coloured blue must be connected to the terminal
which is marked with the letter N or coloured black.
The wire which is coloured brown must be connected to the
terminal which is marked with the fetter L ar cofoured red.
6A.
10.
dis
SAFETY INSTRUCTIONS
Read Instructions — All the safety and operating 12,
instructions should be read before the appliance is
operated.
Retain Instructions — The safety and operating
instructions should be retained for future reference.
Heed Warnings — All warnings on the appliance and 14.
in the operating instructions should be adhered to.
Follow Instructions — All operating and use instruc- 15.
tions should be followed.
Water and Moisture — The appliance should not be 16.
used near water — for example, near a bathtub,
washbowl, kitchen sink, laundry tub, in a wet
basement, or near a swimming pool, and the like.
Carts and Stands — The appliance should be used
only with a cart or stand that is recommended by the
manufacturer.
An appliance and
cart combination
should be moved
with care. Quick
stops, excessive
force, and uneven
a
surfaces may cause eee ore
the appliance and cart combination to overturn.
Wall or Ceiling Mounting — The appliance should be
mounted to a wall or ceiling only as recommended
by the manufacturer.
Ventilation — The appliance should be situated so
that its location or position does not interfere with its
proper ventilation. For example, the appliance
should not be situated on a bed, sofa, rug, or similar
surface that may block the ventilation openings; or,
placed in a built-in installation, such as a bookcase or
cabinet that may impede the flow of air through the
ventilation openings.
Heat — The appliance should be situated away from
heat sources such as radiators, heat registers,
stoves, or other appliances (including amplifiers)
that produce heat.
Power Sources — The appliance should be connected
to a power supply only of the type described in the
operating instructions or as marked on the ap-
pliance.
Grounding or Polarization — Precautions should be
taken so that the grounding or polarization means of
an appliance is not defeated.
FIGURE A
EXAMPLE OF ANTENNA GROUNDING
AS PER NATIONAL
ELECTRICAL CODE
ANTENNA
LEAD 1m
WIRE
ANTENNA
Usat
{NEC SECTION 816-701
ELECTRIC
SERVICE
EOUMMENT
GROUNDING CONDUCTORS
INEC SECTION 810-211
GROUND CLAMPS
POWER SERVICE GROUNDING
Fa BLECTAOOE SYSTEM
{NEC ART 250, PART Ht
NEC - NATIONAL ELECTRICAL CODE
17.
18.
19.
20.
Power-Cord Protection — Power-supply cords should
be routed so that they are not likely to be walked on
or pinched by items placed upon or against them,
paying particular attention to cords at plugs, con-
venience receptacles, and the point where they exit
from the appliance.
Cleaning — The appliance should be cleaned only as
recommended by the manufacturer.
Power Lines — An outdoor antenna should be located
away from power lines.
Outdoor Antenna Grounding — If an outside antenna
is connected to the receiver, be sure the antenna
system is grounded so as to provide some protec-
tion against voltage surges and built-up static
charges. Article 810 of the National Electrical Code,
ANSI/NFPA 70, provides information with regard to
proper grounding of the mast and supporting struc-
ture, grounding of the lead-in wire to an antenna-
discharge unit, size of grounding conductors, loca-
tion of antenna-discharge unit, connection to
grounding electrodes, and requirements for the
grounding electrode. See Figure A. .
Nonuse Periods — The power cord of the appliance
should be unplugged from the outlet when left
unused for a long period of time.
Object and Liquid Entry — Care should be taken so
that objects do not fall and liquids are not spilled into
the enclosure through openings.
Damage Requiring Service ~ The appliance should
be serviced by qualified service personnel when:
A. The power-supply cord or the. plug has been
damaged; or
B. Objects have fallen, or liquid has been spilled into
the appliance; or
C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate normal-
ly or exhibits a marked change in performance; or
E. The appliance has been dropped, or the enclosure
damaged.
Servicing — The user should not attempt to service
the appliance beyond that described in the operating
instructions. All other servicing should be referred to
qualified service personnel.
5090c/0S0e/06GeL “OO ps
a