4
Setup
Items not listed under Introduction > Box Contents are sold separately.
1. Use either XLR cables or RCA cables to connect the DN-300BR’s outputs (balanced or
unbalanced) to your loudspeakers, mixer, amplifier, or other device that accepts line-level
inputs (this device must be powered off).
Important: For stereo operation, make sure all left (L) and right (R) outputs are connected
to left and right inputs, respectively.
2. Use the included power cable to connect DN-300BR’s AC input to your power source.
Press the power button to turn on DN-300BR.
Important: Do not use DN-300BR near a microwave oven, which can interfere with the
reception.
3. If you are using a mixer, make sure all of its connections are secure, and power it on.
4. Power on your loudspeakers last.
Example
PA loudspeakers Loudspeakers
Mixer
Smartphone,
tablet, etc.
Power
To Next Page
Loading...
