Denon DN-508MX - Technical Specifications; English

73
Appendix (English)
Technical Specifications
Audio/Signal
Frequency Response
20 Hz – 20 kHz (+0.5 dB)
Dynamic Range
> 109 dB (A-weighted)
Signal-to-Noise Ratio
> 89 dB (A-weighted)
Headroom
> 20 dB
Mic Input EIN
< -127 dBu (Rs = 150 Ω, DIN)
Mic Input CMRR
> 80 dB
Maximum Gain
88 dB (Mic Input to Master Output)
Channel Separation
< -100 dB
THD+N Mic/Line Inputs
< 0.05%
ST Inputs
< 0.01%
Analog Inputs Mic Inputs Maximum: -40 to -20 dBu (+4 dBu)
Unity: -60 to -40 dBu (-16 dBu)
Line Inputs Maximum: -20 to 0 dBu (+24 dBu)
Unity: -40 to -20 dBu (+4 dBu)
ST Inputs Maximum: +18 dBV
Unity: 0 dBV
Aux Inputs Maximum: +18 dBV
Unity: 0 dBV
Analog Outputs Zone Outputs Maximum: +24 dBu
Unity: +4 dBu
Effects
Equalization
(3-Band, Inputs)
SHH
100 Hz – 20 kHz (+18 dB)
PEQ
100 Hz – 20 kHz (+18 dB), Q: 0.1–63.0
SHL
20 Hz – 20 kHz (+18 dB)
Equalization
(5-Band, Outputs)
High PEQ
100 Hz – 20 kHz (+18 dB), Q: 0.1–63.0
Mid-High PEQ
100 Hz – 20 kHz (+18 dB), Q: 0.1–63.0
Mid PEQ
100 Hz – 20 kHz (+18 dB), Q: 0.1–63.0
Mid-Low PEQ
100 Hz – 20 kHz (+18 dB), Q: 0.1–63.0
Low PEQ
20 Hz – 20 kHz (+18 dB), Q: 0.1–63.0
Delay Attenuation
0–1000 ms